Amana Washing Machine: loud noise

Professional Repair Guide

What is this symptom?

Is your Amana washing machine making loud noises during operation? This can include knocking, thumping, grinding, or banging sounds that exceed the normal operating noise levels. Such sounds may indicate an off-balance load, worn bearings, or other issues needing attention. Don't ignore these signs to keep your appliance running smoothly.

Urgency: Medium

Important Tips for Amana Models

  • Amana official guidance emphasizes off-balance loads causing knocking/thumping noise during agitation/spin

Possible Causes

Off-balance load

How to Identify: Noise primarily during spin/agitation, washer vibrating, one side heavier clothes

Part: Laundry load distribution

Worn bearings or tub seal failure

How to Identify: Loud grinding or rumbling sound when drum spins, noise consistent regardless of load

Part: Tub bearings and seal

Drive belt wear or damage

How to Identify: High-pitched squeal or thumping during motor operation, noise from bottom of washer

Part: Drive belt

Defective drain pump

How to Identify: Noise primarily during drain cycle, rattling when water is pumped out

Part: Drain pump

DIY Solutions

Redistribute laundry load

Easy 5-10 minutes
  1. Stop washer and open lid/door
  2. Rearrange clothes evenly around drum
  3. Remove excess heavy items and balance load
  4. Restart cycle
⚠️ Safety First: Do not overload machine

Inspect and remove foreign objects

Moderate 10-30 minutes
Tools Needed: Flashlight, Needle-nose pliers
  1. Unplug machine
  2. Check drum interior for small items
  3. Check around agitator/pulser and drain pump access for debris
  4. Remove visible objects
⚠️ Safety First: Unplug machine before inspection

Next step

Choose the next step for loud noise

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Drain Pump

Pumps waste water out of the appliance during the drain cycle.

$35 - $80 · Easy · 15-30 mins

Check fit & price
Model number required

Model-compatible Washing Machine parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Washing Machine Cleaner Tablets

Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.

View maintenance supply
Maintenance supply

Braided Washer Inlet Hoses

A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.

View maintenance supply
Maintenance supply

Washer Drain Hose Holder

Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Professional Repairs

Replace tub bearings and seal

Estimated Cost: $80 - $200

Replace drive belt

Estimated Cost: $20 - $60

Replace drain pump

Estimated Cost: $50 - $150

When to Call a Professional

Noise persists after balancing load and debris removal
Identifiable grinding/rubbing sounds from internal components
Leakage accompanies noise
Bearing or pump replacement indicated

Preventive Maintenance

  • Check and balance laundry loads properly: Off-balance noise and vibration
    Frequency: Each use
  • Regularly remove coins/objects from pockets before washing: Foreign object noise and internal component damage
    Frequency: Each use

Frequently Asked Questions

Why is my Amana Washing Machine loud noise?
Common causes include an off-balance load, worn bearings, or a damaged drive belt.
How do I fix Amana Washing Machine loud noise myself?
Redistribute the laundry load or check for foreign objects in the drum or agitator.
How much does it cost to fix loud noise?
Professional repairs range from $20 for a drive belt to $200 for tub bearings.
When should I call a technician for loud noise?
If DIY fixes don't resolve the issue or if the noise persists, it's time to call a pro.

References & Sources

Community Analytical Insights

Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions

Common Issues Reported by Users

  • Loose or damaged pulley
  • Worn out drum bearings
  • Foreign objects in the drum or pump

User Suggested Solutions

  1. Inspect and tighten the pulley. If loose, secure it properly. If damaged, replace the pulley.

  2. Check the drum bearings by removing the drum. If they are worn out, replace them.

  3. Inspect the drum and pump for foreign objects. Remove any debris found.

Limited-source guidance; percentages and success-rate claims are not shown
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. Amana Washing Machine Funky Noise

Community Discussions

making a wild sound

Resecured a loose nut on the pulley, resolving the noise issue.

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!

Call Local Repair Provider +1 (888) 217-6318