Amana Washing Machine: faulty control panel

Professional Repair Guide

What is this symptom?

Experiencing issues with your Amana washing machine's control panel? You may notice unresponsive buttons, a lack of display lights, or controls failing to function during wash cycles. These issues can stem from common causes such as the Control Lock feature being activated or more serious problems like a blown fuse or a malfunctioning electronic control board.

Urgency: Medium

Important Tips for Amana Models

  • Amana official support specifies resetting the washer control panel by unplugging power for several minutes as recommended first step.

Possible Causes

Control Lock (Control Lock feature activated)

How to Identify: Control lock indicator light is on and panel does not accept inputs

Part: Control Lock feature

Blown internal fuse or blown line fuse

How to Identify: Washer has no display lights or responsiveness, multimeter shows no continuity at fuse

Part: Internal line fuse

Electronic control board failure

How to Identify: Unresponsive panel not fixed by reset/power checks, error codes unrelated, likely requires board replacement

Part: Main control board

DIY Solutions

Reset control panel by power cycling

Easy 10 minutes
Tools Needed: none
  1. Unplug the washing machine from the power outlet
  2. Wait for at least 5 minutes
  3. Plug the washer back in and attempt to operate controls
⚠️ Safety First: Ensure power is fully disconnected before waiting period

Check and deactivate Control Lock feature

Easy 5 minutes
Tools Needed: user manual (to verify Control Lock sequence)
  1. Identify if the Control Lock indicator is illuminated
  2. Follow the model-specific sequence to deactivate Control Lock
  3. Test panel responsiveness after deactivating
⚠️ Safety First: Refer to your model’s manual for correct sequence

Inspect power cord and outlet

Moderate 10-20 minutes
Tools Needed: multimeter
  1. Unplug the washer
  2. Visually inspect the power cord for damage
  3. Test continuity of the power cord with a multimeter
  4. Verify outlet has correct voltage with another device
⚠️ Safety First: Ensure power is off before testing continuity

Professional Repairs

Replace internal line fuse

Estimated Cost: $10 - $50 (part) + labor

Replace main control board/panel assembly

Estimated Cost: $150 - $400 (parts) + labor

When to Call a Professional

Control panel remains unresponsive after reset/power checks
Visible damage to internal wiring or components
Blown fuses or control board suspected after DIY testing

Preventive Maintenance

  • Regularly check for moisture around control panel: Corrosion or shorting that can affect control electronics
    Frequency: monthly
  • Power cycle occasionally when minor glitches occur: Control panel software glitches from persisting
    Frequency: as needed

Frequently Asked Questions

Why is my Amana Washing Machine faulty control panel?
Common causes include the Control Lock being activated, a blown internal fuse, or an electronic control board failure.
How do I fix Amana Washing Machine faulty control panel myself?
You can reset the control panel by power cycling or check and deactivate the Control Lock feature.
How much does it cost to fix faulty control panel?
Replacing the internal line fuse costs $10 - $50, while the main control board replacement ranges from $150 to $400.
When should I call a technician for faulty control panel?
If DIY solutions don't resolve the issue, or if the problem persists, consider calling a technician.

References & Sources

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

65%
DIY Success Rate Difficulty: Either

Common Issues Reported by Users

  • Power supply issues, such as a blown fuse or tripped circuit breaker
  • Faulty control board due to wear and tear or electrical surges
  • Loose or damaged wiring connections to the control panel

User Suggested Solutions

  1. Check the power supply by inspecting the fuse box and resetting any tripped breakers. Replace any blown fuses.

  2. Inspect the control board for visible signs of damage or burnt components. If damaged, replace the control board.

  3. Examine wiring connections to the control panel for any loose or damaged wires. Reconnect or replace as necessary.

Analysis based on 1 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. Repair or Replace?

Community Discussions

computer panel needs to be replaced

User decided to repair the washer instead of replacing it.

Pro needed View on Reddit →

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!