Amana Refrigerator: not functioning

Professional Repair Guide

What is this symptom?

Is your Amana refrigerator not functioning? You may notice a lack of cooling and no signs of compressor activity. This could indicate issues with power supply or internal components. Follow our troubleshooting guide to identify and resolve the problem quickly.

Urgency: High

Important Tips for Amana Models

Official Amana guidance prioritizes confirming power supply issues first when there is no operation at all

Possible Causes

No electrical power to refrigerator

How to Identify: No lights, display, or sound when fridge plugged in; test outlet with another appliance

Part: Power supply / outlet / circuit breaker

Internal start device failure (relay/overload) preventing compressor start

How to Identify: Fridge has power (lights/display but compressor doesn’t start and fridge doesn’t cool

Part: Compressor start relay or overload protector

Compressor or sealed system failure

How to Identify: Power on but no cooling and compressor is silent or overheats

Part: Compressor / sealed refrigeration system

DIY Solutions

Verify and reset power supply

Easy 5-15 minutes

Tools Needed: small lamp or other appliance to test outlet

Unplug refrigerator and plug another appliance into the same outlet to confirm power.
Check home circuit breaker and reset if tripped.
Ensure refrigerator power cord is firmly connected and no visible damage.

⚠️ Safety First: Do not attempt if outlet shows signs of damage or sparks

Check for compressor start attempt noise

Moderate 10-20 minutes

Tools Needed: none

Listen at the rear of the fridge when powered on for compressor clicking or hum.
If clicking repeatedly then shutting off, suspect relay/overload.
If silent and fridge is warm, consider professional test.

⚠️ Safety First: Unplug before inspecting rear components

Next step

Choose the next step for not functioning

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Compressor

Compresses refrigerant within the sealed cooling system and requires specialized service equipment.

Typical part-only price: $180 - $600
DIY difficulty: Hard
Estimated time: 120-240 mins

Optional: enter your model number

Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Refrigerator parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Refrigerator Condenser Coil Brush

For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.

View maintenance supply

Maintenance supply

Model-Compatible Refrigerator Water Filter

A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.

Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.

Find one that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Professional Repairs

Replace compressor start relay / overload

Estimated Cost: $30 - $120 parts (plus labor)

Repair or replace compressor or sealed system

Estimated Cost: $200 - $600+

When to Call a Professional

No lights and outlet tested is working but fridge still won’t power

Compressor won’t start and you hear clicking or humming repeatedly

After DIY power checks fridge still does not cool

Preventive Maintenance

Clean condenser coils: Overheating and compressor strain
Frequency: every 6 months
Inspect and secure power cord: Intermittent power issues
Frequency: annually

Frequently Asked Questions

Why is my Amana Refrigerator not functioning?

Common causes include no electrical power, internal start device failure, or compressor issues.

How do I fix Amana Refrigerator not functioning myself?

Check the power supply, reset breakers, and listen for compressor noises.

How much does it cost to fix not functioning?

Repairs can range from $30 for relay replacement to over $600 for compressor issues.

When should I call a technician for not functioning?

Call a technician if DIY fixes don't resolve the issue or if you hear persistent clicking sounds.

References & Sources

Amana No Operation Will Not Turn On Official

Community Analytical Insights

Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions

Common Issues Reported by Users

Faulty water filter
Clogged water line
Defective control board

User Suggested Solutions

Replace the water filter. Locate the filter compartment, remove the old filter, and install a new one following the manufacturer's instructions.
Clear the water line. Disconnect the refrigerator from the power supply, locate the water line, and check for kinks or clogs. Use warm water to clear any blockages.
Test and replace the control board if necessary. This involves removing the back panel of the refrigerator, checking for any visible damage, and replacing the board if it shows signs of failure.

Limited-source guidance; percentages and success-rate claims are not shown
View Sources