Amana Refrigerator Error F1

⚡ Quick Answer: The Amana Refrigerator F1 error indicates a fault in the fresh food compartment temperature sensor (thermistor), leading to inaccurate temperature rea... ✅ DIY Fixable

What Does Error F1 Mean?

The Amana Refrigerator F1 error indicates a fault in the fresh food compartment temperature sensor (thermistor), leading to inaccurate temperature readings and inconsistent cooling. This can cause your refrigerator to fail in maintaining proper food storage temperatures, resulting in potential spoilage or food safety issues.

Common Symptoms:

  • Display shows F1 error
  • Refrigerator not responding correctly to temperature changes
  • Possible unstable or incorrect fresh food compartment temperature

Possible Causes

  • Fresh food temperature sensor (thermistor) failure or incorrect reading (medium)

How to Fix Error F1

DIY Fix Basic system reset and observation

  1. Unplug the refrigerator or shut off its circuit breaker for at least 1 minute.
  2. Restore power and allow the fridge to restart.
  3. Monitor the display to see if the F1 code returns.

Technician Only Test and replace faulty fresh food temperature sensor

  1. Disconnect power to the refrigerator.
  2. Access the fresh food temperature sensor/thermistor location (model dependent).
  3. Measure the sensor's resistance using a multimeter and compare to expected values per service manual.
  4. Replace the sensor if readings are out of specification.
  5. Reassemble, restore power, and verify the F1 error is cleared.

Parts needed: Fresh food temperature sensor/thermistor

🛑 When to Call a Pro:
  • Error persists after reset.
  • Uncertain how to safely access and test the temperature sensor.
  • Signs of additional faults (e.g., frosting, compressor issues, or multiple error codes).

Next step

Choose the next step for F1

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Temperature Sensor

Monitors the internal temperature to ensure correct operation and prevent overheating.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Thermistor

Measures precise temperature changes and sends resistance feedback to the control board.

$15 - $35 · Easy · 15-30 mins

Check fit & price
Model number required

Model-compatible Refrigerator parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Refrigerator Condenser Coil Brush

For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.

View maintenance supply
Maintenance supply

Model-Compatible Refrigerator Water Filter

A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.

Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.

Find one that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage
component Temperature Sensor
resistance 10-15 kΩ
part_number W10822644
voltage_rating 120V AC

Common Questions

What does F1 error mean on Amana Refrigerator?

F1 error indicates a failure in the fresh food compartment temperature sensor, leading to incorrect temperature readings.

Can I fix Amana Refrigerator F1 error myself?

Yes, you can attempt a basic system reset by unplugging the refrigerator for a minute and monitoring if the error returns.

How much does it cost to fix F1 error?

The estimated cost to repair the F1 error ranges from $30 to $120, depending on the parts and labor required.

When should I call a technician for F1?

Call a technician if the error persists after a reset, if you're unsure how to test the sensor, or if there are additional faults.

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!