Amana Refrigerator Error IT

⚡ Quick Answer: The Amana Refrigerator IT error code indicates a malfunction in the ice maker, which may prevent ice production or cause unusual operational noises. T... ✅ DIY Fixable

What Does Error IT Mean?

The Amana Refrigerator IT error code indicates a malfunction in the ice maker, which may prevent ice production or cause unusual operational noises. This issue can stem from various underlying problems, potentially including faulty components like the control board or wiring issues. A basic reset may clear the error; however, persistent issues may require professional evaluation.

Possible Causes

  • Ice Maker Assembly
  • Water Supply Line
  • Control Board

How to Fix Error IT

DIY Fix Attempt Basic Reset to Clear Unknown Code

  1. Unplug the refrigerator from the electrical outlet.
  2. Wait 5–10 minutes, then plug it back in.
  3. Allow the refrigerator to restart and observe the control panel for further codes.

Technician Only Service Technician Diagnostic Evaluation

  1. Inspect the control/display board and wiring harnesses for faults.
  2. Use manufacturer diagnostic procedures (if available) to read live codes via service mode.
  3. Check for any stored fault codes in the refrigerator’s controller memory.
  4. Verify thermostat, sensors, and interface panel functionality.

Parts needed: Control board (if found faulty), Wiring harness/connectors, Temperature sensors

🛑 When to Call a Pro:
  • If the code persists after a basic reset.
  • If the refrigerator stops cooling or exhibits operational faults (e.g., no cooling, fan not running).
  • If there are signs of electrical issues (smoke, burning smell, or panel failure).

Technical Specifications

wattage 100W
component Ice Maker Assembly
resistance 10-20 ohms
part_number W10882923
voltage_rating 120V AC

Common Questions

What does IT error mean on Amana Refrigerator?

The IT error indicates an issue with the ice maker, leading to potential ice production failure.

Can I fix Amana Refrigerator IT error myself?

Yes, try a basic reset by unplugging the fridge for 5–10 minutes and then plugging it back in.

How much does it cost to fix IT error?

Repair costs typically range from $100 to $300, depending on the issue.

When should I call a technician for IT?

Call a technician if the error persists after a reset, or if there are cooling issues or signs of electrical problems.

Sources & References

Data last verified: 2026-01-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!