Amana Refrigerator: damaged crisper bin

Professional Repair Guide

What is this symptom?

Is your Amana Refrigerator's crisper bin cracked or not sliding properly? This common issue can reduce your storage capacity and affect humidity control, impacting the freshness of your produce. Understanding the causes and solutions can help you restore your refrigerator's functionality.

Urgency: Low

Important Tips for Amana Models

Amana crisper drawers and slide rails are available as OEM parts; correct model lookup is necessary to ensure fit.

Possible Causes

Physical damage and plastic fatigue

How to Identify: Visible cracks, chips, broken tabs, or pieces missing; drawer may not slide or stay aligned.

Part: Crisper drawer/bin plastic body

Damaged slide rails or support rails

How to Identify: Drawer not sliding smoothly, catching, or falling off track; rails may be visibly cracked or worn.

Part: Crisper drawer slide rails/support guides

Incorrect installation or misalignment

How to Identify: Drawer misaligned in tracks, doesn’t seat properly when inserted.

Part: Crisper bin installation position

DIY Solutions

Replace broken crisper drawer with OEM replacement

Moderate 15-30 minutes

Tools Needed: none or screwdriver if rails attached with screws

Locate your refrigerator model number (inside fridge) to find correct part.
Purchase OEM crisper drawer/bin for your Amana model from parts supplier.
Remove old damaged drawer by pulling drawer fully out, tilting up front and lifting out.
Clean area, then align new drawer on rails and slide it into place until seated properly.

⚠️ Safety First: Disconnect food contents temporarily to avoid spills; no electrical hazard present.

Inspect and replace damaged slide rails/supports

Moderate 15-40 minutes

Tools Needed: screwdriver if rails secured with screws

Pull out crisper drawer and inspect the rails or supports for cracks/broken tabs.
Order replacement rails/supports matching your refrigerator model.
Remove old rails by unscrewing or snapping off as appropriate.
Install new rails and slide crisper drawer back in to test smooth operation.

Temporary plastic repair of small cracks

Advanced 1-2 hours

Tools Needed: plastic epoxy or plastic welding kit

Clean the cracked area thoroughly and let dry.
Follow epoxy or plastic welding product instructions to bond plastic.
Allow full cure before reinserting drawer and loading produce.

⚠️ Safety First: Work in ventilated area; follow adhesive safety instructions.

Next step

Choose the next step for damaged crisper bin

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Model number required

Browse by model — no specific failed part is claimed

Model-compatible Refrigerator parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Enter your complete model number for compatible results

Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Search results are not a diagnosis. Verify both the complete appliance model and the retailer's fit information before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Refrigerator Condenser Coil Brush

For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.

View maintenance supply

Maintenance supply

Model-Compatible Refrigerator Water Filter

A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.

Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.

Find one that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Professional Repairs

Professional replacement of crisper bin and supports

Estimated Cost: $80 - $150 for parts, $50 - $120 labor

When to Call a Professional

If you cannot identify correct part number or fitment for your Amana model

If damage extends beyond the drawer to internal compartment rails or structure

Preventive Maintenance

Handle drawer gently and avoid overloading heavy items: Stress fractures and cracking of plastic drawer
Frequency: ongoing
Clean drawer and tracks periodically: Debris buildup that can cause sticking and uneven stress
Frequency: monthly

Frequently Asked Questions

Why is my Amana Refrigerator damaged crisper bin?

Common causes include physical damage, plastic fatigue, and occasionally damaged slide rails or misalignment.

How do I fix Amana Refrigerator damaged crisper bin myself?

You can replace the crisper drawer or inspect and replace slide rails. For small cracks, consider a temporary plastic repair.

How much does it cost to fix damaged crisper bin?

Professional repairs typically cost between $80 - $150 for parts and $50 - $120 for labor.

When should I call a technician for damaged crisper bin?

If DIY repairs seem complex or if you need professional-grade assistance, it's best to call a technician.

References & Sources

Installing the Bins and Shelves – Amana Official

Community Analytical Insights

Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions

Common Issues Reported by Users

Physical impact or dropping heavy items into the crisper bin
Age-related wear and tear leading to brittleness of plastic
Improper installation or misalignment causing stress on the bin

User Suggested Solutions

Inspect the crisper bin for cracks and replace if necessary. To replace, remove the old bin by sliding it out, and install the new bin by aligning it with the tracks and sliding it back in place.
If the bin is cracked but still usable, consider using clear epoxy or plastic adhesive to repair the cracks. Clean the area, apply the adhesive, and allow it to cure as per the manufacturer's instructions.
Check the alignment of the crisper bin and adjust if necessary. Ensure that the refrigerator shelves are level and that the bin is seated correctly to avoid stress fractures.

Limited-source guidance; percentages and success-rate claims are not shown
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

Amana refrigerator crisper bin replacement

Community Discussions

cracked crisper bin

The correct crisper pan part number is WP67002633, which measures 6.9" High X 14.05" Wide X 14.9" Long.