Amana Dryer: making noise

Possible Causes

Foreign objects in drum or blower housing

How to Identify: Irregular rattling or scraping sounds; noise often changes when pausing drum and checking inside edges of drum or blower wheel area; removal of pockets often reveals items like coins/buckles.

Part: Blower wheel / drum interior

Worn drum glides or felt seals

How to Identify: Grinding or scraping sounds; may accompany uneven drum rotation.

Part: Drum glides / felt pads

Worn drum bearing

How to Identify: Squealing or grinding noise with drum resistance when rotated manually with belt off.

Part: Drum bearing

Dryer not level or improperly positioned

How to Identify: Thumping or vibration due to imbalance; resolved by leveling dryer.

Part: Leveling legs / installation

DIY Solutions

Remove foreign objects from drum and blower area

Easy 10-20 minutes

Tools Needed: flashlight, long tweezers or pliers

1. Turn off and unplug dryer.
2. Open dryer door and inspect drum edges for coins, pins, or small hardware.
3. Remove visible objects from drum seam and blower housing.
4. Run dryer empty to check if noise is resolved.

⚠️ Safety First: Always unplug before reaching inside drum edges

Level dryer to reduce vibration

Easy 10-15 minutes

Tools Needed: wrench or adjustable pliers, level

1. Unplug dryer.
2. Place level on top of dryer.
3. Adjust leveling legs until dryer is balanced front-to-back and side-to-side.
4. Tighten leg locks and test dryer noise.

⚠️ Safety First: Ensure dryer is stable to avoid tipping

Inspect and replace worn drive belt or idler pulley

Moderate 60-120 minutes

Tools Needed: screwdrivers, socket set, replacement belt/pulley

1. Unplug dryer and pull unit from wall.
2. Remove top/front panel per model instructions.
3. Locate drive belt and idler pulley.
4. Inspect belt for wear and pulley for smooth spin.
5. Replace worn parts.
6. Reassemble panels and test dryer.

⚠️ Safety First: Disconnect power; follow model-specific access directions

Inspect and replace drum support rollers

Advanced 90-150 minutes

Tools Needed: screwdrivers, socket set, replacement rollers

1. Unplug dryer and access drum support rollers by removing panels.
2. Remove drum and replace each support roller.
3. Clean lint and debris from axle surfaces.
4. Reassemble drum and test.

⚠️ Safety First: Parts can be heavy; follow safety for panel removal

Professional Repairs

Replace worn drum bearing or internal bearings

Estimated Cost: $120 - $250

Motor or blower assembly replacement

Estimated Cost: $150 - $350

When to Call a Professional

Persistent grinding or squealing after DIY; noise accompanied by burning smell

Drum won’t rotate freely when belt removed

Gas valve or ignition noise abnormalities

Preventive Maintenance

• Clean lint filter after every use: Foreign objects and airflow restriction noise
  Frequency: per load
• Inspect and clean dryer vent annually: Airflow restriction and stress on motor/parts
  Frequency: annually

Frequently Asked Questions

Why is my Amana Dryer making noise?

Common causes include foreign objects in the drum, worn drum glides, or the dryer being unlevel.

How do I fix my Amana Dryer making noise myself?

Start by removing foreign objects from the drum and blower, then level the dryer. Inspect and replace worn parts if necessary.

How much does it cost to fix making noise?

Professional repairs for noise issues can range from $120 to $350, depending on the part that needs replacing.

When should I call a technician for making noise?

If DIY solutions do not resolve the issue, or if you suspect major component failure, it's time to call a professional.

References & Sources

• Amana Dryer Noises and Lights Troubleshooting Guide Official
• Amana Dryer Squealing or Squeaking Sound Help Official

Can I Fix This Myself?

50%

DIY Success Rate Difficulty: Either

Common Issues Reported by Users

• Worn drum rollers (1 mentions)
• Faulty belt or motor components (1 mentions)

User Suggested Solutions

1. Check and replace worn drum rollers and shafts

   Success rate: 50.0%

2. Inspect belt and motor components for issues

   Success rate: 0.0%

Community Discussions

drum rollers are starting to make noise

Check the condition of the shafts and replace if roughness is found; consider better quality rollers.

DIY View on Reddit →

Source: Reddit r/appliancerepair