Amana Dryer Error AF
⚡ Quick Answer: The Amana Dryer AF error code signals an airflow issue, typically due to a blocked vent or lint filter. This restriction leads to longer drying times ... ✅ DIY Fixable
What Does Error AF Mean?
The Amana Dryer AF error code signals an airflow issue, typically due to a blocked vent or lint filter. This restriction leads to longer drying times and may cause overheating. Ensure proper airflow by checking for clogs in the lint screen and venting system.
Common Symptoms:
- Dryer displays AF code on the control panel
- Longer-than-normal drying times
- Heat not being expelled efficiently
- Dryer may continue to run despite the error code
Possible Causes
- Clogged lint screen or internal lint buildup (high)
- Blocked or restricted venting (vent hose or external vent blocked, crushed, kinked, or too many turns) (high)
How to Fix Error AF
DIY Fix Check and clean lint screen and dryer vent
- Unplug the dryer from power.
- Remove and clean the lint screen, removing all lint.
- Pull the dryer away from the wall and inspect the vent hose for kinks, crushing, or lint buildup.
- Disconnect vent hose from dryer and wall; clean inside using a vent brush or vacuum.
- Check the outdoor vent hood for obstructions and ensure it opens freely.
- Reassemble and test the dryer to see if AF clears.
Technician Only Inspect and service full vent and airflow system
- Perform a thorough inspection of the entire venting system including ductwork inside walls.
- Inspect blower wheel for lint buildup or damage.
- Verify proper vent hose type and installation (prefer rigid/semi-rigid metal vent where possible).
- Test airflow at outlet while dryer is operating.
- Replace damaged vent components or blower assembly if found faulty.
Parts needed: Vent ducting (rigid/semi-rigid), blower wheel, Clamps, exterior vent hood
- If airflow restrictions persist after user-level vent cleaning.
- If there is suspected damage to internal components like blower wheel or motor.
- If the dryer shows additional error codes beyond AF indicating deeper system faults.
Next step
Choose the next step for AF
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Dryer Blower Wheel
Moves heated air through the dryer drum and exhaust system.
- Typical part-only price
- $25 - $70
- DIY difficulty
- Medium
- Estimated time
- 45-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 5000W |
|---|---|
| component | Blower Wheel |
| resistance | 5-15 ohms |
| part_number | W10837240 |
| voltage_rating | 240V AC |
Common Questions
What does AF error mean on Amana Dryer?
The AF error indicates a restricted airflow due to blockages in the vent or lint filter.
Can I fix Amana Dryer AF error myself?
Yes, you can clean the lint screen and inspect the venting for kinks or blockages.
How much does it cost to fix AF error?
The estimated repair cost ranges from $50 to $250, depending on the extent of cleaning and part replacement.
When should I call a technician for AF?
Call a technician if airflow issues persist after cleaning or if there are additional error codes present.
Sources & References
- Error Codes in Dryers - Product Help | Amana (official)
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!