Amana Dryer Error L2
⚡ Quick Answer: The Amana dryer L2 error indicates insufficient line voltage to the heating element, preventing it from producing heat during the drying cycle. This e... ✅ DIY Fixable
What Does Error L2 Mean?
The Amana dryer L2 error indicates insufficient line voltage to the heating element, preventing it from producing heat during the drying cycle. This error often appears after initial installation or power interruptions. Symptoms include the dryer running without heating and the L2 code displayed on the control panel. It's crucial to ensure that your dryer is receiving the proper 240V supply for optimal performance.
Common Symptoms:
- Dryer runs but does not heat
- Error code L2 displayed on control panel
- May occur after installation or power interruption
Possible Causes
- Insufficient line voltage to dryer heating circuit (high)
- Tripped or blown circuit breaker/fuse affecting 240V supply (medium)
How to Fix Error L2
DIY Fix Check household circuit breakers/fuses
- Locate your home electrical panel.
- Verify the two breakers/fuses feeding the dryer (240V) are not tripped or blown.
- Reset breakers or replace fuses if needed.
- Attempt a dry cycle again to see if code clears.
DIY Fix Verify power cord installation
- Unplug dryer from outlet.
- Inspect the power cord wiring at the dryer terminal block.
- Ensure proper installation per your model’s instructions for 3‑wire or 4‑wire configuration.
- Tighten terminal screws if loose and re‑plug in.
- Restart the dryer to check if L2 persists.
Technician Only Measure incoming voltage and inspect electrical supply
- Use a multimeter to measure voltage between the two hot terminals at dryer power connection.
- Verify ~240 volts between outer terminals and ~120 volts to neutral.
- Inspect outlet, cord, and breaker panel wiring for damage or poor connections.
- Repair or replace faulty wiring, receptacle, or breaker as needed.
Parts needed: Multimeter, Power cord (if defective), Circuit breaker or fuse
- You are unable to verify voltage safely, lack proper tools, or the issue persists after basic checks.
- Evidence of damaged wiring or outlets, sparks, burning smell, or heat at the outlet.
- Circuit breakers repeatedly trip when resetting.
Next step
Choose the next step for L2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Power Cord
Supplies mains power to the appliance and includes the model-specific plug and terminal connection.
- Typical part-only price
- $15 - $70
- DIY difficulty
- Medium
- Estimated time
- 20-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 5400W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | WP3387747 |
| voltage_rating | 240V AC |
Common Questions
What does L2 error mean on Amana dryer?
L2 error indicates insufficient voltage to the heating circuit, causing the dryer to run without heat.
Can I fix Amana dryer L2 error myself?
Yes, you can check circuit breakers and verify the power cord installation.
How much does it cost to fix L2 error?
The estimated repair cost ranges from $50 to $200+, depending on the electrician's service.
When should I call a technician for L2?
Call a technician if you cannot verify voltage safely or if issues persist after basic checks.
Sources & References
- L2 - Error Code - Dryer - Amana Product Help (official)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!