Aeg Dishwasher: water spraying

Professional Repair Guide

What is this symptom?

If your AEG dishwasher is spraying water in an abnormal manner, it can lead to leaks or overspray onto the door seals or floor. This issue may stem from spray arm obstructions, incorrect loading of dishes, or even a clogged spray arm. Ensuring proper functioning of these components is crucial to avoid water escaping the tub during operation.

Urgency: Medium

Important Tips for Aeg Models

  • AEG documentation specifically calls out spray arm obstruction and improper rotation as causes of water spray misdirection and leaks.

Possible Causes

Spray arm obstruction or damage causing water to spray in wrong direction

How to Identify: Spray arms not rotating freely, blocked by dishes, or cracked/holes misdirecting water jets; water seen spraying toward door seal or corner

Part: Spray arms (upper/lower)

Incorrect loading of dishwasher items obstructing spray arm motion

How to Identify: Large items placed incorrectly in lower/upper rack blocking spray arm rotation; spray arm doesn’t spin freely

Part: Dish load arrangement

Dishwasher not levelled properly causing improper water direction

How to Identify: Appliance leans forward/backward; water leaks at door bottom or sprays outside when cycle runs

Part: Dishwasher leveling/feet

Clogged spray arm holes from debris/mineral buildup reducing effective spray pattern

How to Identify: Spray holes blocked by debris/mineral deposits; weak or uneven water jets

Part: Spray arms

Faulty water inlet valve causing excess water or water spraying incorrectly

How to Identify: Continuous water inflow or overfilling leading to erratic spray pressure and leaking during cycles

Part: Water inlet valve

DIY Solutions

Ensure correct loading and free movement of spray arms

Easy 5-10 minutes
  1. Remove large items blocking spray arm movement
  2. Ensure dishes are arranged so spray arms rotate freely
  3. Manually spin spray arms to check they rotate without obstruction
  4. Re-run a short rinse cycle to confirm normal spraying
⚠️ Safety First: Do not force obstructed spray arms while machine is running

Clean spray arms to remove debris or mineral buildup

Moderate 15-30 minutes
Tools Needed: Toothpick or small brush, Warm water
  1. Turn off and unplug dishwasher
  2. Remove lower and upper spray arms per manual instructions
  3. Rinse spray arms under warm water
  4. Use a toothpick or brush to clear each hole
  5. Reinstall spray arms ensuring they lock into place
⚠️ Safety First: Disconnect power before working inside dishwasher

Level the dishwasher

Moderate 10-20 minutes
Tools Needed: Spirit level, Adjustable wrench or screwdriver
  1. Place spirit level on top of dishwasher to check front-to-back and side-to-side
  2. Adjust the feet to make dishwasher level
  3. Re-check level and tighten feet
⚠️ Safety First: Ensure dishwasher remains stable and secure after adjustments

Professional Repairs

Replace damaged spray arms or components

Estimated Cost: $30 - $100

Inspect and replace water inlet valve

Estimated Cost: $50 - $150

When to Call a Professional

Spray arms or internal components are visibly cracked or broken
Persistent water spraying or leaking despite cleaning and correct loading
Water inlet valve suspected to be malfunctioning

Preventive Maintenance

  • Clean spray arms and filters regularly: Clogging and abnormal spray patterns
    Frequency: Monthly
  • Check dishwasher level periodically: Water leaking or abnormal spray pressure due to uneven stance
    Frequency: Quarterly

Frequently Asked Questions

Why is my AEG Dishwasher water spraying?
Common causes include spray arm obstructions, incorrect loading, or clogged spray arm holes.
How do I fix AEG Dishwasher water spraying myself?
Ensure correct loading, clean spray arms, and check if the dishwasher is level.
How much does it cost to fix water spraying?
Professional repairs may range from $30 to $150 depending on the issue.
When should I call a technician for water spraying?
Call a technician if DIY fixes don't work or if you suspect a faulty inlet valve.

References & Sources

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

75%
DIY Success Rate Difficulty: Either

Common Issues Reported by Users

  • Faulty water inlet valve causing continuous water flow
  • Clogged spray arm preventing proper water distribution
  • Damaged door seal allowing water to escape

User Suggested Solutions

  1. Inspect and replace the water inlet valve. Disconnect the dishwasher from power, turn off the water supply, remove the valve, and check for blockages or damage. If faulty, replace it with a new valve and reconnect everything.

  2. Clean the spray arm. Remove the spray arm from the dishwasher, rinse it under warm water, and use a toothpick to clear any clogs in the spray holes. Reinstall and test the dishwasher.

  3. Inspect and replace the door seal. Open the door and check the rubber seal for tears or wear. If damaged, remove the old seal and install a new one to prevent leaks.

Analysis based on 1 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. Dishwasher spraying water

Community Discussions

spraying fresh water when connected to electricity

Inspect and possibly clean or replace the water inlet valve.

DIY View on Reddit →

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!