Aeg Dishwasher Error i10

⚡ Quick Answer: The AEG dishwasher error code i10 indicates a water inlet issue, preventing the appliance from filling with water. This can occur due to insufficient ... ✅ DIY Fixable

What Does Error i10 Mean?

The AEG dishwasher error code i10 indicates a water inlet issue, preventing the appliance from filling with water. This can occur due to insufficient water supply, a kinked or blocked inlet hose, or a clogged inlet hose filter. When the i10 code appears, the dishwasher may stop at the start or during the early filling phase, often accompanied by a single beep or blinking warning light. Addressing these issues promptly can restore functionality.

Common Symptoms:

  • Dishwasher does not fill with water
  • Dishwasher stops at start or during early fill phase
  • Single beep or single blink of warning light with i10 displayed

Possible Causes

  • Water supply is not available or insufficient (high)
  • Inlet hose kinked, twisted, or blocked (high)
  • Clogged inlet hose filter (medium)

How to Fix Error i10

DIY Fix Check and restore water supply

  1. Ensure the dishwasher’s water tap is fully open.
  2. Open a nearby tap to confirm water is flowing and has adequate pressure.
  3. If the pressure appears low, avoid running other appliances that use water simultaneously and re-test.

DIY Fix Inspect and clean inlet hose and filter

  1. Turn off the water supply and power to the dishwasher.
  2. Disconnect the inlet hose at the water tap.
  3. Remove and clean the small filter screen in the hose connector of any debris or scale.
  4. Reconnect the inlet hose ensuring no kinks are present.

Technician Only Check and replace water inlet components

  1. Measure house water pressure to confirm it meets dishwasher specifications.
  2. Inspect inlet valve assembly for proper operation and replace if defective.
  3. Verify water level sensor (pressure sensor) functionality if water enters but error persists.

Parts needed: Inlet valve / Aquastop assembly, Inlet hose filter, Pressure/water level sensor

🛑 When to Call a Pro:
  • If water supply, inlet hose, and filter checks do not resolve the i10 error.
  • If internal components such as the inlet valve or pressure sensor are suspected faulty.
  • If you are uncomfortable performing water and electrical component checks yourself.

Technical Specifications

wattage 20W
component Water Inlet Valve
resistance 500-1500 ohms
part_number AEG 1240000000
voltage_rating 230V AC

Common Questions

What does i10 error mean on AEG dishwasher?

The i10 error indicates a water inlet issue, preventing the dishwasher from filling with water.

Can I fix AEG dishwasher i10 error myself?

Yes, you can check the water supply, inspect the inlet hose, and clean the inlet filter.

How much does it cost to fix i10 error?

The estimated repair cost for the i10 error ranges from $50 to $200+, depending on parts and labor.

When should I call a technician for i10?

Call a technician if your checks do not resolve the issue or if internal components are suspected to be faulty.

Sources & References

Data last verified: 2026-03-13

User Comments (0)

Share your experience or solution below.

Be the first to comment!