AEG Dishwasher: not filling correctly
What is this symptom?
Is your AEG dishwasher not filling correctly? This issue can manifest as a silent start or a display of error codes like i10, i11, or E1. Common causes include water supply problems, a blocked inlet valve, or issues with the float assembly. Understanding these symptoms can help you troubleshoot effectively.
Important Tips for AEG Models
- Error codes i10, i11, or E1 specifically indicate water inlet issues — water supply shutoff, restricted intake, or low pressure.
Possible Causes
Water supply not turned on or low water pressure
How to Identify: Water tap to dishwasher is closed or water pressure in home is insufficient; error codes i10, i11, or E1 on AEG display indicating water intake problem. No water enters at cycle start.
Part: Water supply line/tap
Faulty or blocked water inlet valve
How to Identify: Dishwasher makes humming noise without water flow; inlet valve screen clogged or valve solenoid electrically failed. Confirms with multimeter testing.
Part: Water inlet valve
Malfunctioning float/float switch
How to Identify: Float may be stuck in up position preventing fill; inspect inside tub float movement. If float switch faulty, dishwasher thinks full and won’t fill.
Part: Float assembly and float switch
Electrical/control issues including wiring or control board
How to Identify: Dishwasher has power but valve not energized at start; no click from valve, possible wiring break in door harness or control output fault.
Part: Control board/inlet valve wiring
DIY Solutions
Check and open the water supply
- Locate water supply tap under sink or near dishwasher and ensure it is fully open.
- Verify household water pressure is within recommended range (check other faucets).
- Check for blockages at water tap or supply line.
Inspect and clean inlet hose filter
- Turn off water supply and power to dishwasher.
- Unscrew the inlet hose from dishwasher and check for debris or mineral buildup in hose and filter screen.
- Rinse filter screen under clean water and reinstall hose ensuring secure connection.
- Restore water and power, then test a cycle.
Check the float assembly
- Open dishwasher door and locate float inside bottom of tub.
- Move float up and down ensuring it moves freely and is not obstructed.
- If debris is present, gently clean around float to free it.
- Test cycle.
Next step
Choose the next step for not filling correctly
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Float Switch
Detects the maximum water level to prevent overflow and potential flooding.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Professional Repairs
Replace water inlet valve
Diagnose and repair wiring or control board faults
When to Call a Professional
Preventive Maintenance
-
Regularly clean the inlet hose filter: Blockages that can stop water filling
Frequency: every 3–6 months -
Check float movement and clean around float: Float sticking causing false full signals
Frequency: every 6 months
Frequently Asked Questions
Why is my AEG Dishwasher not filling correctly?
How do I fix AEG Dishwasher not filling correctly myself?
How much does it cost to fix not filling correctly?
When should I call a technician for not filling correctly?
References & Sources
Community Analytical Insights
Analysis based on real user discussions from appliance repair communities
Can I Fix This Myself?
Common Issues Reported by Users
- Clogged water inlet valve
- Faulty float switch
- Defective water supply hose
User Suggested Solutions
-
Inspect and clean the water inlet valve. Disconnect the dishwasher from power and water supply. Remove the inlet valve and check for clogs or debris. Clean or replace as necessary.
-
Test and replace the float switch if faulty. Access the float switch by removing the lower dish rack and cover. Check for movement and continuity. Replace if it does not function properly.
-
Inspect the water supply hose for kinks or damage. Ensure the hose is properly connected and replace if damaged.
Analysis based on 1 community discussions
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
Community Discussions
water inlet valve not functioning properly, causing overfilling
likely need to replace the control board due to constant voltage at the inlet valve harness
Source: Reddit r/appliancerepair
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!