Euromaid Dishwasher Error i30
⚡ Quick Answer: The i30 error code on your Euromaid dishwasher indicates a water leakage detection issue. This problem is often characterized by the dishwasher stoppi... ✅ DIY Fixable
What Does Error i30 Mean?
The i30 error code on your Euromaid dishwasher indicates a water leakage detection issue. This problem is often characterized by the dishwasher stopping mid-cycle, a continuous beeping sound, and the display showing the error code. Typically, this occurs when water is detected in the base or when the flood sensor has been triggered, necessitating immediate attention to prevent further issues.
Common Symptoms:
- Dishwasher stops mid‑cycle
- Possible water detected in base / flood sensor triggered
- Error display persists until water issues addressed
Possible Causes
- internal water leak / flood sensor triggered (medium)
How to Fix Error i30
DIY Fix Check for Water Accumulation and Reset
- Turn off and unplug the dishwasher.
- Check the base of the dishwasher for any visible water or leaks.
- Remove any standing water and ensure the dishwasher is dry before restarting.
Technician Only Inspect Flood Sensor and Water Pathways
- Inspect and test the flood detection sensor for proper function.
- Check for leaks in hoses, inlet valve, drain system and seals.
- Repair or replace components found to be faulty.
Parts needed: flood sensor, inlet valve, hoses and seals
- If water is found in base and cannot be removed safely
- If error persists after drying and resetting
- If there are signs of internal leaks or damaged hoses
Next step
Choose the next step for i30
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Float Switch
Detects the maximum water level to prevent overflow and potential flooding.
- Typical part-only price
- $15 - $40
- DIY difficulty
- Easy
- Estimated time
- 10-20 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does i30 error mean on euromaid dishwasher?
The i30 error indicates a water leakage detection issue, causing the dishwasher to stop mid-cycle.
Can I fix euromaid dishwasher i30 error myself?
Yes, check for water accumulation and reset the dishwasher by turning it off, unplugging it, and ensuring the base is dry.
How much does it cost to fix i30 error?
The estimated repair cost ranges from $100 to $300+, depending on parts and labor.
When should I call a technician for i30?
Call a technician if water is found in the base and cannot be safely removed, if the error persists after drying, or if there are signs of internal leaks.
Sources & References
- Euromaid Dishwasher Error Codes (partial list) (official)
- AEG Dishwasher i30 Error – Internal Leak (community)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!