Euromaid Dishwasher Error E2

⚡ Quick Answer: The Euromaid dishwasher E2 error code indicates a malfunction in the drain pump, typically resulting in longer drain times or failure to drain water c... ✅ DIY Fixable

What Does Error E2 Mean?

The Euromaid dishwasher E2 error code indicates a malfunction in the drain pump, typically resulting in longer drain times or failure to drain water completely. Users may experience a mid-cycle stoppage, unusual sounds from the appliance, or standing water in the dishwasher tub. This error often arises due to an incorrectly positioned drain hose or blockages in the drainage system.

Common Symptoms:

  • Dishwasher displays E2 and may stop mid‑cycle when attempting to drain
  • Drain appears slow or water remains in dishwasher tub

Possible Causes

  • Drain hose installed too high or incorrectly positioned (high)
  • Kinked or crushed drain hose or blocked drain outlet (medium)

How to Fix Error E2

DIY Fix Check drain hose and layout

  1. Turn off and unplug dishwasher.
  2. Locate the drain hose behind the dishwasher.
  3. Ensure the hose is not bent, kinked, crushed, or placed above recommended height per installation instructions.
  4. If the hose is too high or incorrectly looped, reposition within correct installation configuration.

DIY Fix Clear filters and check drainage path

  1. Open dishwasher and remove bottom filter assembly.
  2. Clean food debris and clear filter.
  3. Inspect the drain opening and remove obstructions.
  4. Run a short rinse cycle to test if water drains normally.

Technician Only Inspect and replace defective drain components

  1. Disconnect dishwasher from power and water supply.
  2. Remove access panel and inspect drain pump, hose and connections.
  3. If drain pump is defective or clogged internally, replace with manufacturer‑specified part.
  4. Verify proper hose routing and secure with correct clips or fittings.

Parts needed: drain pump, drain hose

🛑 When to Call a Pro:
  • If water remains in base after attempted drainage and error persists after cleaning and hose repositioning
  • If drain pump shows signs of failure (no sound or movement during attempted drain)

Next step

Choose the next step for E2

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Drain Pump

Pumps waste water out of the appliance during the drain cycle.

Typical part-only price
$35 - $80
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Also check
RepairClinic

Other components that may be involved

Check these only if your diagnosis points to them.

Possible related component

Drain Hose

Carries waste water from the drain pump to your home's standpipe or sink drain.

$15 - $30 · Easy · 15-30 mins

Check fit & price

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-30 ohms
part_number EURO-DP1234
voltage_rating 240V AC

Common Questions

What does E2 error mean on euromaid dishwasher?

The E2 error indicates a drain pump malfunction, leading to slow drainage or standing water.

Can I fix euromaid dishwasher E2 error myself?

Yes, you can check the drain hose for kinks and clear filters to resolve the E2 error.

How much does it cost to fix E2 error?

The estimated repair cost for the E2 error ranges from $50 to $200 depending on the necessary parts.

When should I call a technician for E2?

Call a technician if water remains after cleaning or if the drain pump shows no signs of operation.

Sources & References

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!