Euromaid Dishwasher Error i20
⚡ Quick Answer: The i20 error code on your Euromaid dishwasher indicates a drainage issue, where the appliance struggles to remove water from the tub during its cycle... ✅ DIY Fixable
What Does Error i20 Mean?
The i20 error code on your Euromaid dishwasher indicates a drainage issue, where the appliance struggles to remove water from the tub during its cycle. Common symptoms include standing water at the end of the wash, mid-cycle interruptions, and the display showing the i20 code or emitting beeps. This often results from a clogged drain path, a restricted drain hose installation, or potential faults with the drain pump.
Common Symptoms:
- standing water in dishwasher at end of cycle
- cycle stops mid‑program when draining
- LED/display shows i20 and/or beeps indicating a fault
Possible Causes
- clogged or obstructed drain path (filter, sump, hose) (medium)
- incorrect or restricted drain hose installation (medium)
- drain pump or related mechanical fault (low)
How to Fix Error i20
DIY Fix Basic drainage checks and cleaning
- Turn off and unplug the dishwasher.
- Remove the bottom rack and access the filter area.
- Clean the filter, sump area, and check for debris.
- Inspect visible sections of the drain hose for kinks or blockages.
- Ensure any air gap on your sink is clear of build‑up.
- Restart the dishwasher to see if the error clears.
Technician Only Advanced drainage system inspection
- Disconnect power and water supply.
- Remove access panels to inspect the drain pump and impeller for debris or damage.
- Test the drain pump for proper electrical operation with a multimeter.
- Inspect and possibly replace the drain hose if crimped or severely blocked.
- Verify correct drain hose routing and height per installation specifications.
Parts needed: drain pump, drain hose, filters/sump components
- If the error persists after all accessible drainage and filter cleaning steps
- If the drain pump hums but does not operate or shows electrical faults
- If you are uncomfortable accessing internal components or hoses
Next step
Choose the next step for i20
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | EUDR-12345 |
| voltage_rating | 240V AC |
Common Questions
What does i20 error mean on euromaid dishwasher?
The i20 error indicates a drainage problem, often resulting in standing water and interrupted cycles.
Can I fix euromaid dishwasher i20 error myself?
Yes, you can check and clean the filter and drain area to potentially resolve the issue.
How much does it cost to fix i20 error?
Repair costs typically range from $50 to $200+, depending on parts and labor.
When should I call a technician for i20?
Call a technician if the error persists after cleaning, or if you notice pump issues or feel uncomfortable accessing internal components.
Sources & References
- Euromaid Dishwasher Error Codes (official)
- Electrolux Support – i20 not draining (official)
Data last verified: 2026-04-23
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!