Euromaid Dishwasher Error i10

⚡ Quick Answer: The i10 error code on your Euromaid dishwasher indicates a water inlet problem, often resulting in the dishwasher failing to fill with water during it... ✅ DIY Fixable

What Does Error i10 Mean?

The i10 error code on your Euromaid dishwasher indicates a water inlet problem, often resulting in the dishwasher failing to fill with water during its cycle. This issue may stem from an obstructed or kinked inlet hose, a clogged inlet filter, or insufficient water supply from the main tap. Addressing these issues promptly can restore normal operation and prevent further complications.

Common Symptoms:

  • Dishwasher fails to fill with water
  • Error displayed early in cycle
  • Beeping or LED indication with code

Possible Causes

  • Water inlet issue (no/low water supply) (medium)
  • Clogged or kinked inlet hose/filter (medium)

How to Fix Error i10

DIY Fix Check water supply and inlet conditions

  1. Ensure main water tap supplying dishwasher is fully open.
  2. Inspect inlet hose for kinks, twists, or damage.
  3. Clean the inlet hose filter at the tap/valve connection to remove scale or debris (turn off water before doing so).

Technician Only Inspect/repair water inlet components

  1. Check water pressure and continuity of supply line.
  2. Test inlet valve and replace if malfunctioning.
  3. Verify that float switch/water level sensors are operating correctly and not stuck.
  4. Assess electronic control for proper fill timing and signals.

Parts needed: Inlet valve, Inlet hose, Inlet filter, Float/level sensor

🛑 When to Call a Pro:
  • If water continues not to enter after basic checks
  • If any water leaks are observed
  • If the machine shows additional fault patterns beyond water fill issues

Next step

Choose the next step for i10

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Water Inlet Valve

Controls the flow of hot and cold water into the appliance.

Typical part-only price
$25 - $60
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other components that may be involved

Check these only if your diagnosis points to them.

Possible related component

Float Switch

Detects the maximum water level to prevent overflow and potential flooding.

$15 - $40 · Easy · 10-20 mins

Check fit & price

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 50W
component Water Inlet Valve
resistance 10-20 ohms
part_number EUIV-12345
voltage_rating 240V AC

Common Questions

What does i10 error mean on euromaid dishwasher?

The i10 error indicates a water inlet issue, causing the dishwasher to fail to fill with water.

Can I fix euromaid dishwasher i10 error myself?

Yes, check the water supply, inspect the inlet hose for kinks, and clean the inlet filter.

How much does it cost to fix i10 error?

Estimated repair costs range from $50 to $200, depending on parts and labor.

When should I call a technician for i10?

Call a technician if water still doesn't enter after your checks or if leaks and other faults are observed.

Sources & References

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!