Euromaid Dishwasher Error E8

⚡ Quick Answer: The E8 error code on your Euromaid dishwasher indicates a potential issue with the drain pump, leading to improper water drainage and possible overflo... ✅ DIY Fixable

What Does Error E8 Mean?

The E8 error code on your Euromaid dishwasher indicates a potential issue with the drain pump, leading to improper water drainage and possible overflow. To address this, ensure that the water supply is fully open and inspect both the inlet and drain hoses for any kinks or blockages. Additionally, cleaning the mesh filter in the inlet hose and the internal filters of the dishwasher can help prevent drainage problems.

Possible Causes

  • Drain pump blockage
  • Faulty drain pump
  • Clogged drain hose

How to Fix Error E8

DIY Fix Check basic dishwasher conditions

  1. Ensure the water supply tap is fully open and water pressure is adequate.
  2. Inspect inlet and drain hoses for kinks or blockages.
  3. Clean the mesh filter in the inlet hose and the dishwasher’s internal filters.
  4. Drain any standing water in the base pan before retrying a cycle.

Technician Only Professional diagnosis

  1. Access the dishwasher’s control board and internal sensors to check for fault codes or signals correlated with E8 on the specific model.
  2. Test water-level sensors, float switch, and leakage detection circuits.
  3. Evaluate for water intrusion in the base pan or overflow conditions.
  4. Check any service history and perform electrical diagnostics as appropriate.

Parts needed: diagnostic tools, possible float switch or sensors

🛑 When to Call a Pro:
  • If the error persists after basic checks and cleaning, or if there is evidence of water leakage under the dishwasher.

Next step

Choose the next step for E8

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Float Switch

Detects the maximum water level to prevent overflow and potential flooding.

Typical part-only price
$15 - $40
DIY difficulty
Easy
Estimated time
10-20 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-20 ohms
part_number EURO-DP12345
voltage_rating 240V AC

Common Questions

What does E8 error mean on euromaid dishwasher?

E8 indicates a potential issue with the drain pump, causing improper water drainage.

Can I fix euromaid dishwasher E8 error myself?

Yes, check the water supply, inspect hoses for kinks, and clean the filters.

How much does it cost to fix E8 error?

The repair cost varies by model and region.

When should I call a technician for E8?

Call a technician if the error persists after basic checks or if there's water leakage.

Sources & References

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!