Euromaid Dishwasher Error E13
⚡ Quick Answer: The Euromaid dishwasher E13 error code indicates a malfunction with the drain pump, which may lead to unusual sounds during operation and improper dra... ✅ DIY Fixable
What Does Error E13 Mean?
The Euromaid dishwasher E13 error code indicates a malfunction with the drain pump, which may lead to unusual sounds during operation and improper drainage. To address this issue, check the basic water supply and ensure the inlet hose mesh filter is clean and free from kinks. If the problem persists, further inspection of the drain pump and associated components is necessary.
Possible Causes
- Drain pump blockage
- Faulty drain pump
- Clogged drain hose
How to Fix Error E13
DIY Fix Check basic water supply, filtration and drainage
- Ensure the water supply is turned on and water pressure is adequate.
- Turn off and unplug the dishwasher before working on it.
- Clean the inlet hose mesh filter and ensure it is not kinked.
- Remove and clean the dishwasher filter assembly at the base.
- Check the drain hose is free from kinks or blockages.
- Run the dishwasher again to see if the error clears.
Technician Only Inspect drain pump and circulation components
- Disconnect power and water supply.
- Access the base of the dishwasher to inspect drain pump and sump area.
- Check for foreign debris or blockage in the drain pump and hoses.
- Test the drain pump motor to confirm operation.
- Verify circulation and spray arm rotation are unobstructed.
Parts needed: drain pump, drain hose, filters
- If error persists after clearing all blockages and checking basic drainage and water supply.
- If any internal components (pump, hoses, wiring) show signs of damage or failure.
Next step
Choose the next step for E13
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | EUDRNP1234 |
| voltage_rating | 240V AC |
Common Questions
What does E13 error mean on euromaid dishwasher?
The E13 error indicates a problem with the drain pump, causing unusual sounds and failure to drain.
Can I fix euromaid dishwasher E13 error myself?
Yes, check the water supply, clean the inlet hose mesh filter, and ensure no kinks are present.
How much does it cost to fix E13 error?
Estimated repair costs range from $50 to $200, depending on parts and labor.
When should I call a technician for E13?
Call a technician if the error persists after checking for blockages or if any components show damage.
Sources & References
- Error codes on dishwasher – Euromaid official (official)
- Dishwashers – Troubleshoot | Euromaid (official)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!