Euromaid Dishwasher Error E11
⚡ Quick Answer: The Euromaid dishwasher E11 error indicates a malfunction in the drain pump, which can cause the dishwasher to stop mid-cycle and may lead to poor wat... ✅ DIY Fixable
What Does Error E11 Mean?
The Euromaid dishwasher E11 error indicates a malfunction in the drain pump, which can cause the dishwasher to stop mid-cycle and may lead to poor water drainage and unusual noises during operation. To address this issue, start by checking the water supply and filters for blockages. If the E11 error persists, further inspection of internal components may be necessary.
Common Symptoms:
- Dishwasher stops mid‑cycle with E11 displayed
Possible Causes
- Drain Pump
- Clogged Drain Hose
- Faulty Control Board
How to Fix Error E11
DIY Fix Check basic water supply and filters
- Ensure the mains water supply tap is fully open.
- Inspect the water inlet hose for kinks or blockage.
- Clean the mesh filter in the inlet hose if present.
- Clean internal dishwasher filters (food and drain filters).
- Restart the dishwasher after these checks.
Technician Only Inspect internal sensors and control board
- Use diagnostic tools to read any stored faults beyond the E11 display.
- Check water level sensors and float switch wiring for continuity.
- Verify the main control board connections and inspect for moisture or corrosion.
- Test inlet and drain valves for proper operation.
Parts needed: Float switch / water level sensor, Water inlet valve, Control board (if electrical faults confirmed)
- When E11 persists after checking water supply and filters
- If there is evidence of water leakage or electrical smell
Next step
Choose the next step for E11
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Float Switch
Detects the maximum water level to prevent overflow and potential flooding.
- Typical part-only price
- $15 - $40
- DIY difficulty
- Easy
- Estimated time
- 10-20 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | EUDR-PUMP-001 |
| voltage_rating | 240V AC |
Common Questions
What does E11 error mean on Euromaid dishwasher?
E11 error indicates a malfunction in the drain pump, causing the dishwasher to stop mid-cycle.
Can I fix Euromaid dishwasher E11 error myself?
Yes, check the water supply, inspect the inlet hose, and clean the filters to attempt a fix.
How much does it cost to fix E11 error?
Repair costs vary from USD 100 to 350 depending on parts and labor.
When should I call a technician for E11?
Call a technician if E11 persists after checking water supply, or if there are signs of water leakage or an electrical smell.
Sources & References
- Euromaid Error Codes on Dishwasher (official)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!