Emilia Dishwasher Error E10
⚡ Quick Answer: The E10 error code on your Emilia dishwasher indicates a potential malfunction in the drain pump. This issue may be accompanied by unusual noises duri... ✅ DIY Fixable
What Does Error E10 Mean?
The E10 error code on your Emilia dishwasher indicates a potential malfunction in the drain pump. This issue may be accompanied by unusual noises during operation and a failure to properly drain water from the appliance. To troubleshoot, ensure that the dishwasher is connected to the water supply and power, and that the door is securely closed. Restarting the dishwasher may also help clear the error.
Possible Causes
- Drain Pump
- Blocked Drain Hose
- Faulty Control Board
How to Fix Error E10
DIY Fix Check basic conditions
- Ensure the dishwasher is connected to water supply and power.
- Check that the door is fully closed and latched properly.
- Try powering the dishwasher off and on again to see if the error clears.
Technician Only Consult official service information
- Contact Emilia customer support or authorized service center with the model and serial number to get the official meaning of E10.
- Have a technician inspect the unit’s sensors, control board, and water system if the error persists.
- Obtain any service documentation directly from the manufacturer that explains this error code.
Parts needed: None identified (unknown cause)
- If the error persists after basic checks, or if water leakage, unusual sounds, or operational failures accompany the code.
Next step
Choose the next step for E10
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | EMD-PUMP-001 |
| voltage_rating | 120V AC |
Common Questions
What does E10 error mean on emilia dishwasher?
E10 error indicates a malfunction in the drain pump, often causing drainage issues and unusual noises.
Can I fix emilia dishwasher E10 error myself?
Yes, check the water supply, power connection, and ensure the door is closed. Restarting the dishwasher may also help.
How much does it cost to fix E10 error?
Repair costs vary by model and region; consult a technician for an accurate estimate.
When should I call a technician for E10?
Call a technician if the error persists after basic checks, or if you notice leaks or other unusual sounds.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!