Emilia Dishwasher Error E2
⚡ Quick Answer: The Emilia dishwasher E2 error code indicates a malfunction in the drain pump, typically caused by drainage issues. Symptoms include standing water at... ✅ DIY Fixable
What Does Error E2 Mean?
The Emilia dishwasher E2 error code indicates a malfunction in the drain pump, typically caused by drainage issues. Symptoms include standing water at the bottom of the tub, incomplete cycles due to failure to drain, and the E2 code being displayed when the draining phase exceeds the expected time. Common causes include blockages in the drainage system, such as a clogged filter or drain hose, and potential drain pump malfunctions.
Common Symptoms:
- standing water at bottom of tub after/during cycle
- cycle fails to complete normally due to water not exiting
- E2 displayed when draining phase exceeds expected time
Possible Causes
- Drainage obstruction (filter, sump or drain hose blockage) (medium)
- Drain pump malfunction (medium)
How to Fix Error E2
DIY Fix Check and clear drainage components
- Turn off power to the dishwasher and disconnect from mains.
- Remove lower rack and locate the drain filter at bottom of tub.
- Remove and clean the filter and check the sump area for debris.
- Check the drain hose for kinks or visible blockages; straighten if needed.
- Reassemble and run a short cycle to test if E2 clears.
Technician Only Inspect and service drain pump and hose
- Disconnect dishwasher from power and pull unit out from cabinetry.
- Inspect the drain hose by disconnecting it from both dishwasher outlet and drain connection; remove blockages as required.
- Remove access panel to inspect the drain pump impeller for obstructions or damage.
- Test pump operation (voltage and mechanical rotation); replace pump if faulty.
- Verify hose routing and connections before reassembly.
Parts needed: drain hose, drain pump, filter assembly
- If E2 persists after clearing blockages and visual inspection, indicating potential pump or internal wiring failure.
- If you are not comfortable accessing internal components or removing the unit.
Next step
Choose the next step for E2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
- Typical part-only price
- $15 - $30
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
Dishwasher Filter
Screens food debris from recirculating wash water and protects the pump system.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-30 ohms |
| part_number | EMD-PUMP-001 |
| voltage_rating | 120V AC |
Common Questions
What does E2 error mean on emilia dishwasher?
E2 error indicates a drain pump malfunction, often due to drainage issues.
Can I fix emilia dishwasher E2 error myself?
Yes, check and clean the drainage components like the filter and hose.
How much does it cost to fix E2 error?
Repair costs range from $50 to $200+, depending on parts and labor.
When should I call a technician for E2?
Call if E2 persists after clearing blockages or if you're uncomfortable with repairs.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!