Emilia Dishwasher Error E5
⚡ Quick Answer: The E5 error on your Emilia dishwasher indicates a malfunction in the drain pump, leading to drainage problems. This may manifest as standing water re... ✅ DIY Fixable
What Does Error E5 Mean?
The E5 error on your Emilia dishwasher indicates a malfunction in the drain pump, leading to drainage problems. This may manifest as standing water remaining in the bottom of the dishwasher, unusual noises during operation, or the dishwasher stopping mid-cycle. To address this issue, check the drain filter for debris and inspect the drain hose for any kinks or blockages that could impede water drainage.
Common Symptoms:
- Dishwasher stops mid‑cycle with water remaining
- Standing water at bottom of dishwasher
- Error E5 appears shortly after fill or at end of cycle
Possible Causes
- Water drainage failure / standing water in dishwasher base (medium)
How to Fix Error E5
DIY Fix Check basic water drainage
- Turn off and unplug the dishwasher.
- Check the drain filter and clean any debris.
- Inspect the drain hose for kinks or blockages and reposition if needed.
- Ensure the sink drain (where dishwasher discharge connects) is clear and free flowing.
Technician Only Inspect and repair drainage components
- Access and test the drain pump for proper operation; replace if faulty.
- Check the flood sensor and associated float switch or moisture probe in the base; replace if defective.
- Inspect internal hoses and drain path for blockages or damage.
- Verify wiring and connections related to drain system and sensors.
Parts needed: drain pump, drain hose, flood sensor / moisture detector, filters
- If water remains in dishwasher after basic drainage checks.
- If internal component inspection requires opening panels and testing electrical parts.
- If error persists after cleaning filters and unclogging hoses.
Next step
Choose the next step for E5
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Float Switch
Detects the maximum water level to prevent overflow and potential flooding.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 20-30 ohms |
| part_number | EMD-PUMP-001 |
| voltage_rating | 120V AC |
Common Questions
What does E5 error mean on emilia dishwasher?
The E5 error indicates a drain pump malfunction, causing drainage issues and standing water.
Can I fix emilia dishwasher E5 error myself?
Yes, check the drain filter and hose for blockages as a first step.
How much does it cost to fix E5 error?
Repair costs range from $80 to $250 depending on parts and region.
When should I call a technician for E5?
Call a technician if water remains after basic checks or if you need to inspect internal components.
Sources & References
- E5 Error Code - Dishwasher: Support Article (community)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!