Electrolux Refrigerator Error PF
⚡ Quick Answer: The Electrolux refrigerator PF error code indicates a power failure, likely due to a power outage, surge, or interruption. This may cause the display ... ✅ DIY Fixable
What Does Error PF Mean?
The Electrolux refrigerator PF error code indicates a power failure, likely due to a power outage, surge, or interruption. This may cause the display to flash or the appliance to stop cooling properly. In some cases, the alarm might sound if the temperature rises significantly after the power loss. It's essential to determine whether the issue is a genuine power failure or a glitch in the control board.
Common Symptoms:
- PF displayed on control panel or temperature display
- Fridge continues cooling normally or temperature display blinking PF
- Alarm may sound after prolonged high temperature associated with power loss
Possible Causes
- Power interruption detected by the refrigerator’s control board (high)
- Control board glitch falsely detecting power failure (medium)
How to Fix Error PF
DIY Fix Acknowledge and clear PF code
- Press the alarm reset or mute button on the fridge display to acknowledge the PF code
- Observe if the display returns to normal temperature display
DIY Fix Power cycling the refrigerator
- Unplug the refrigerator from the outlet or turn off the breaker
- Wait at least 3–5 minutes
- Plug the refrigerator back in and check if PF code returns
Technician Only Inspect mains power supply and outlet
- Measure voltage stability at the refrigerator outlet
- Check for loose plug connections or intermittent supply issues
- Replace or repair any faulty supply wiring if needed
Parts needed: multimeter
Technician Only Diagnose and potentially replace control board
- Access the refrigerator’s main control board (under bottom or back panel)
- Check for signs of damage or loose connections
- Replace the control board if faulty
Parts needed: replacement control board
- PF code persists after power cycling and stable mains supply confirmed
- Fridge stops cooling or other error codes appear concurrently
Next step
Choose the next step for PF
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Refrigerator parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Refrigerator Condenser Coil Brush
For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.
Model-Compatible Refrigerator Water Filter
A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.
Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 200W |
|---|---|
| component | Control Board |
| resistance | N/A |
| part_number | 241508001 |
| voltage_rating | 120V AC |
Common Questions
What does PF error mean on Electrolux refrigerator?
PF indicates a power failure detected by the control board, affecting cooling.
Can I fix Electrolux refrigerator PF error myself?
Yes, you can acknowledge the PF code or power cycle the refrigerator.
How much does it cost to fix PF error?
The estimated repair cost ranges from $0 to $50.
When should I call a technician for PF?
Call a technician if the PF code persists after power cycling or if cooling stops.
Sources & References
- Refrigerator Error Code PF or Power Failure Light (official)
- Refrigerator Error Codes and Alarms Guide (official)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!