Electrolux Refrigerator Error E02

⚡ Quick Answer: The Electrolux refrigerator error E02 signifies a malfunction in the temperature sensor, which can lead to erratic temperature fluctuations and unreli... ✅ DIY Fixable

What Does Error E02 Mean?

The Electrolux refrigerator error E02 signifies a malfunction in the temperature sensor, which can lead to erratic temperature fluctuations and unreliable cooling. This issue often results in the refrigerator/freezer display showing the E02 code, indicating potential problems with the internal temperature readings. If the error persists after basic troubleshooting, professional inspection of the temperature sensor and associated circuits may be necessary.

Common Symptoms:

  • Refrigerator/freezer display shows E02
  • Potential temperature reading issues or incorrect internal temperature behavior

Possible Causes

  • Temperature sensor fault (medium)

How to Fix Error E02

DIY Fix Basic checks and reset attempt

  1. Ensure doors are fully closed and sealed
  2. Unplug the refrigerator for a few minutes or switch off breaker to reset error
  3. Plug back in and observe if error clears

Technician Only Inspect and test temperature sensor circuits

  1. Disconnect mains power.
  2. Locate internal temperature sensors and wiring harness.
  3. Use multimeter to verify sensor resistance values against specifications.
  4. Check connectors and harness for damage or corrosion.
  5. Replace faulty sensor if confirmed defective.

Parts needed: Temperature sensor(s), Connector harnesses

🛑 When to Call a Pro:
  • Error persists after reset attempts
  • Refrigerator temperatures are not stable or correct
  • Signs of frost, condensation, or compressor issues

Next step

Choose the next step for E02

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Temperature Sensor

Monitors the internal temperature to ensure correct operation and prevent overheating.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Refrigerator parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Refrigerator Condenser Coil Brush

For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.

View maintenance supply
Maintenance supply

Model-Compatible Refrigerator Water Filter

A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.

Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.

Find one that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage
component Temperature Sensor
resistance 10k ohms at 25°C
part_number 241734301
voltage_rating 120V AC

Common Questions

What does E02 error mean on electrolux refrigerator?

The E02 error indicates a fault in the temperature sensor, leading to unstable cooling and incorrect temperature readings.

Can I fix electrolux refrigerator E02 error myself?

Yes, you can try basic checks like ensuring the doors are closed and reset the refrigerator by unplugging it for a few minutes.

How much does it cost to fix E02 error?

The estimated repair cost for the E02 error ranges from $50 to $200, depending on the model and region.

When should I call a technician for E02?

Call a technician if the error persists after resetting, if temperatures are unstable, or if there are signs of frost or compressor issues.

Sources & References

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!