Electrolux Refrigerator Error E01
⚡ Quick Answer: The Electrolux refrigerator error code E01 indicates a malfunction in the temperature sensor, leading to erratic temperature readings and inconsistent... ⚠️ Difficulty Varies
What Does Error E01 Mean?
The Electrolux refrigerator error code E01 indicates a malfunction in the temperature sensor, leading to erratic temperature readings and inconsistent cooling. This code may be accompanied by symptoms such as the display of E01 on the refrigerator panel and noticeable temperature irregularities. The issue is often due to a faulty or out-of-range temperature sensor or intermittent communication problems with the sensor wiring.
Common Symptoms:
- Error code E01 displayed on refrigerator panel
- Temperature irregularities (too warm/too cold) may accompany code
- Error remains after simple reset
Possible Causes
- Faulty or out‑of‑range temperature sensor (medium)
- Intermittent sensor communication or wiring issue (medium)
How to Fix Error E01
DIY Fix Basic checks and reset
- Note any accompanying temperature irregularity or unusual behavior
- Ensure refrigerator is plugged in and power supply is stable
- Unplug the refrigerator or switch off its circuit breaker for 5–10 minutes to reset control electronics
- Plug in and observe if E01 clears and normal operation resumes
Technician Only Inspect sensor and wiring
- Disconnect power to the unit and access internal temperature sensor(s)
- Inspect sensor connectors and wiring harness for loose connections, corrosion, or damage
- Test sensor continuity and resistance according to model‑specific specifications
- Replace any defective sensor or repair wiring as needed
- Verify proper sensor readings and restore power to confirm resolution
Parts needed: Temperature sensor(s), Wiring harness/connectors
- If E01 persists after basic reset and visible symptom checks
- If sensor testing indicates open/short conditions but resolution is unclear
- If access to internal wiring/sensors is unsafe or unsupported by user skill
Next step
Choose the next step for E01
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Refrigerator parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Refrigerator Condenser Coil Brush
For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.
Model-Compatible Refrigerator Water Filter
A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.
Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | |
|---|---|
| component | Temperature Sensor |
| resistance | 10k ohms at 25°C |
| part_number | 241734301 |
| voltage_rating | 120V AC |
Common Questions
What does E01 error mean on Electrolux refrigerator?
E01 indicates a malfunction in the temperature sensor, causing erratic cooling.
Can I fix Electrolux refrigerator E01 error myself?
Yes, you can try resetting the fridge and checking for temperature irregularities.
How much does it cost to fix E01 error?
Repair costs typically range from $50 to $200, depending on parts and labor.
When should I call a technician for E01?
Call a technician if E01 persists after a reset or if sensor testing shows issues.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!