Daewoo Dishwasher Error E11

⚡ Quick Answer: The Daewoo dishwasher error E11 typically indicates a malfunction in the drain pump, which may result in unusual noises during operation or failure to... ✅ DIY Fixable

What Does Error E11 Mean?

The Daewoo dishwasher error E11 typically indicates a malfunction in the drain pump, which may result in unusual noises during operation or failure to drain water. Users should check for basic operational issues, such as ensuring the door is securely closed and the water supply is functional. A reset by unplugging the machine for 10–15 minutes may also clear transient faults. If the error persists, professional diagnosis is recommended.

Possible Causes

  • Drain pump assembly
  • Blocked drain hose
  • Faulty control board

How to Fix Error E11

DIY Fix Check basic operational issues

  1. Turn off and unplug the dishwasher for 10–15 minutes, then reconnect and restart to see if transient faults clear (general reset).
  2. Ensure the dishwasher door is fully closed and latched properly.
  3. Check that water supply valves are open and no obvious water or power supply issues are present.

Technician Only Professional diagnosis required

  1. Access the internal control board and inspect for obvious damage, moisture ingress, or burnt components.
  2. Use service manual for the specific Daewoo dishwasher model to look up error codes in diagnostic mode, if available.
  3. Perform targeted component checks (e.g., door latch switches, control board communication lines) using proper tools and service documentation.

Parts needed: control board, door latch switch, communication wiring

🛑 When to Call a Pro:
  • If the error persists after basic reset and checks.
  • If there are signs of water leaks, burning smell, smoke, or the machine will not start at all.

Next step

Choose the next step for E11

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

Typical part-only price
$120 - $280
DIY difficulty
Medium
Estimated time
20-40 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 50W
component Drain Pump Assembly
resistance 10-30 ohms
part_number DW-123456
voltage_rating 120V AC

Common Questions

What does E11 error mean on daewoo dishwasher?

E11 error indicates a drain pump malfunction, often causing failure to drain water.

Can I fix daewoo dishwasher E11 error myself?

Yes, try resetting the dishwasher and checking the door latch and water supply.

How much does it cost to fix E11 error?

Repair costs vary, typically starting at ¥10,000 for a service call.

When should I call a technician for E11?

Call a technician if the error persists after resets or if you notice leaks or unusual smells.

Sources & References

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!