Daewoo Dishwasher Error E08

⚡ Quick Answer: The Daewoo dishwasher E08 error indicates a potential malfunction in the drain pump. This error may manifest on the control panel, often accompanied b... ✅ DIY Fixable

What Does Error E08 Mean?

The Daewoo dishwasher E08 error indicates a potential malfunction in the drain pump. This error may manifest on the control panel, often accompanied by unusual noises during operation. If you encounter the E08 code, performing basic checks and resetting the appliance may resolve the issue. If the error persists, further inspection of the dishwasher components may be required.

Common Symptoms:

  • Dishwasher displays E08 on control panel

Possible Causes

  • Drain Pump

How to Fix Error E08

DIY Fix Basic checks and reset

  1. Turn off the dishwasher and disconnect from power for at least 30 seconds.
  2. Reconnect power and attempt a reset by following the procedure in your user manual (e.g., power on then hold Start button).
  3. Observe whether the E08 code clears and if the dishwasher operates normally.

Technician Only Inspect dishwasher components

  1. Check for blockages in spray arms and ensure they rotate freely (general dishwasher troubleshooting, not specific to Daewoo).
  2. Verify water inlet and drainage are unobstructed.
  3. Examine wiring and connectors for any visible damage.

Parts needed: Spray arm assembly (if applicable), Water inlet components, Drain components

🛑 When to Call a Pro:
  • If error persists after basic reset and checks
  • If visible moisture, leaks, or electrical issues are present
  • If you are not comfortable performing internal inspections

Next step

Choose the next step for E08

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Spray Arm

Rotates and sprays high-pressure water to clean dishes inside the tub.

Typical part-only price
$20 - $55
DIY difficulty
Easy
Estimated time
5-10 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-30 ohms
part_number DW-DRP-001
voltage_rating 120V AC

Common Questions

What does E08 error mean on daewoo dishwasher?

E08 indicates a potential malfunction in the drain pump, shown on the control panel.

Can I fix daewoo dishwasher E08 error myself?

Yes, try resetting the dishwasher and performing basic checks.

How much does it cost to fix E08 error?

Repair costs vary based on parts and service needed.

When should I call a technician for E08?

Call if the error persists after a reset, or if you notice leaks or electrical issues.

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!