Daewoo Dishwasher Error E07

⚡ Quick Answer: The Daewoo dishwasher error E07 indicates a malfunction in the drain pump, possibly linked to a turbidity sensor issue that detects water cleanliness.... ✅ DIY Fixable

What Does Error E07 Mean?

The Daewoo dishwasher error E07 indicates a malfunction in the drain pump, possibly linked to a turbidity sensor issue that detects water cleanliness. Users may hear unusual noises during operation, and the error can interrupt the wash cycle. It's essential to address this error promptly to ensure optimal cleaning performance.

Common Symptoms:

  • Dishwasher displays E07 during operation indicating a fault condition
  • Possible interruption mid‑cycle depending on model

Possible Causes

  • Turbidity sensor malfunction (according to a community repair source) (low)

How to Fix Error E07

DIY Fix Check basic conditions and reset

  1. Power off the dishwasher and unplug it for several minutes.
  2. Ensure the dishwasher door is fully closed and latched correctly.
  3. Remove and clean filters and check for visible debris in the tub.
  4. Plug the dishwasher back in and restart a cycle to see if the error clears.

Technician Only Inspect turbidity sensor and related components

  1. Disconnect power to the dishwasher.
  2. Access the turbidity sensor assembly (location depends on model).
  3. Check for loose wiring, corrosion, or foreign material on the sensor.
  4. Test sensor continuity or readings per service manual specifications.
  5. Replace the turbidity sensor if defective.

Parts needed: Turbidity sensor assembly, Associated wiring harness

🛑 When to Call a Pro:
  • If the error persists after basic resets and cleaning, or if you are unsure how to access internal components safely.

Next step

Choose the next step for E07

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Drain Pump

Pumps waste water out of the appliance during the drain cycle.

Typical part-only price
$35 - $80
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Also check
RepairClinic

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 50W
component Drain Pump
resistance 30-50 ohms
part_number DW-PUMP-001
voltage_rating 120V AC

Common Questions

What does E07 error mean on daewoo dishwasher?

E07 indicates a drain pump malfunction, possibly related to a turbidity sensor issue.

Can I fix daewoo dishwasher E07 error myself?

Yes, you can try resetting the dishwasher and cleaning the filters.

How much does it cost to fix E07 error?

Repair costs vary by model and region but are typically moderate.

When should I call a technician for E07?

Call a technician if the error persists after troubleshooting or if you're unsure about accessing internal components.

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!