Daewoo Air Conditioner Error P6

⚡ Quick Answer: The Daewoo air conditioner P6 error indicates that the compressor has activated its overload protection due to high temperatures or electrical issues.... ✅ DIY Fixable

What Does Error P6 Mean?

The Daewoo air conditioner P6 error indicates that the compressor has activated its overload protection due to high temperatures or electrical issues. Symptoms include the unit displaying the P6 code, poor performance or overheating of the outdoor unit, and a noticeable reduction or complete halt in cooling efficiency. This may also be accompanied by unusual humming sounds, signaling potential condenser high-temperature protection failure.

Common Symptoms:

  • Unit displays P6 on control/display
  • Outdoor/condenser unit runs poorly or overheats
  • Cooling performance reduced or stops

Possible Causes

  • Condenser high‑temperature protection trip (medium)

How to Fix Error P6

DIY Fix Basic user checks and reset

  1. Turn off the air conditioner and disconnect power for ~10 minutes
  2. Ensure outdoor unit has clear airflow and no debris obstructing the condenser coils or fan
  3. Restart the unit and observe if P6 recurs

Technician Only Technician inspection of outdoor unit and protection circuit

  1. Inspect and clean the condenser coil and outdoor fan assembly
  2. Measure outdoor fan motor operation and airflow
  3. Check thermal cutoff or high‑temperature protection switch on the condenser
  4. Verify wiring between outdoor and indoor units
  5. Test outdoor PCB and protection circuitry for faults

Parts needed: condenser coil, outdoor fan motor, temperature/overheat protection sensor, wiring harness, outdoor PCB

🛑 When to Call a Pro:
  • If P6 persists after basic airflow and reset attempts
  • If outdoor fan does not spin or there are signs of overheating
  • If you are uncomfortable working around electrical components or the outdoor unit

Technical Specifications

wattage 1500W
component Compressor
resistance 5-10 ohms
part_number DAEWOO-123456
voltage_rating 220V AC

Common Questions

What does P6 error mean on daewoo air conditioner?

The P6 error indicates compressor overload protection due to high temperature or electrical issues.

Can I fix daewoo air conditioner P6 error myself?

Yes, you can turn off the AC, disconnect power for 10 minutes, and check for airflow obstructions.

How much does it cost to fix P6 error?

Repair costs range from $150 to $500+, depending on parts and labor.

When should I call a technician for P6?

Call a technician if P6 persists after basic checks or if you notice overheating or fan issues.

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!