Daewoo Air Conditioner Error P1

⚡ Quick Answer: The Daewoo air conditioner P1 error code indicates a protective fault, often linked to drainage issues or abnormal electrical conditions. Symptoms inc... ✅ DIY Fixable

What Does Error P1 Mean?

The Daewoo air conditioner P1 error code indicates a protective fault, often linked to drainage issues or abnormal electrical conditions. Symptoms include the unit stopping operation and displaying the P1 code during startup or normal function. Common causes are outdoor unit voltage protection being triggered due to over/under voltage or high pressure protection related to the compressor. Immediate checks of the power supply and voltage stability are recommended to address this issue.

Common Symptoms:

  • Unit stops normally running and displays P1
  • May occur during startup or normal operation when system detects abnormal electrical or pressure conditions

Possible Causes

  • Outdoor unit voltage protection triggered (over/under voltage) (medium)
  • High pressure or compressor related protection (low)

How to Fix Error P1

DIY Fix Check power supply and reset

  1. Turn off unit at mains and wait several minutes
  2. Ensure supply voltage is stable and within rated range (avoid extension cords)
  3. Restore power and observe if P1 persists

Technician Only Inspect outdoor unit electrical and pressure systems

  1. Verify input voltage at outdoor unit terminals with voltmeter
  2. Check wiring and connections for looseness or corrosion
  3. Measure system pressures and inspect high‑pressure protection components

Parts needed: multimeter, electrical connectors, pressure sensors

🛑 When to Call a Pro:
  • P1 persists after power/voltage checks
  • Unit exhibits additional abnormal behavior (no cooling, unusual noises)

Next step

Choose the next step for P1

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Wiring Harness

Connects controls, sensors, motors, and other electrical components inside the appliance.

Typical part-only price
$20 - $120
DIY difficulty
Medium
Estimated time
30-90 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Air Conditioner parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Air Conditioner Fin Cleaner

For routine cleaning of accessible coil fins when permitted by the manufacturer. Disconnect power and follow product and appliance instructions.

View maintenance supply
Maintenance supply

Model-Compatible Washable AC Filter

A reusable filter option only where the appliance supports one. Match the full model, dimensions, and filter specification.

Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.

Find one that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage 1500W
component Drainage System
resistance N/A
part_number DAE-DRAIN-001
voltage_rating 115V AC

Common Questions

What does P1 error mean on daewoo air conditioner?

The P1 error indicates a protective fault related to drainage or abnormal electrical conditions.

Can I fix daewoo air conditioner P1 error myself?

Yes, check the power supply, reset the unit, and ensure voltage is stable.

How much does it cost to fix P1 error?

Repair costs for the P1 error typically range from $80 to $200 for diagnostics and minor repairs.

When should I call a technician for P1?

Call a technician if the P1 error persists after checks or if the unit shows abnormal behavior.

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!