Daewoo Air Conditioner Error 3
⚡ Quick Answer: The Daewoo air conditioner error code 3 signifies a failure in the indoor temperature sensor, which can lead to erratic temperature readings and incon... ✅ DIY Fixable
What Does Error 3 Mean?
The Daewoo air conditioner error code 3 signifies a failure in the indoor temperature sensor, which can lead to erratic temperature readings and inconsistent cooling. This issue often stems from communication or connection problems between the indoor and outdoor units. It's essential to check the wiring and sensor connections to resolve this fault and restore optimal performance.
Common Symptoms:
- Error code 3 displayed on indoor unit display
- Possible failure to run or abnormal operation
Possible Causes
- Communication/connection or sensor fixation issue between indoor and outdoor units (medium)
- Potential gas leakage indicated in some community documentation (low)
How to Fix Error 3
DIY Fix Basic Inspection & Reset
- Turn off the air conditioner and disconnect power at the breaker.
- Wait a few minutes, then restore power and restart the unit to see if the error clears.
- Ensure remote control settings and indoor temperature settings are correct.
Technician Only Technician Diagnostic and Repair
- Check the voltage between N and Y on the terminal block and verify correct wiring connections between indoor and outdoor units.
- Inspect the relay KI on the power PCB and verify the indoor coil thermistor fixation and connections.
- Check for signs of refrigerant gas leakage and inspect sensors and communication wiring for faults.
Parts needed: Terminal block wiring harness, Relay KI on power PCB, Indoor coil thermistor, Refrigerant lines (for leakage inspection)
- If basic reset and simple checks do not clear the error
- If wiring or components inside units need inspection beyond user capability
- When refrigerant system issues or gas leaks are suspected
Next step
Choose the next step for 3
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Power Control Board
Distributes and switches electrical power for the appliance's major loads.
- Typical part-only price
- $90 - $260
- DIY difficulty
- Hard
- Estimated time
- 30-75 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Thermistor
Measures precise temperature changes and sends resistance feedback to the control board.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Indoor Temperature Sensor |
| resistance | 10k ohms at 25°C |
| part_number | DAC-TS-001 |
| voltage_rating | 5V DC |
Common Questions
What does 3 error mean on daewoo air conditioner?
Error 3 indicates a failure in the indoor temperature sensor, causing erratic readings and inconsistent cooling.
Can I fix daewoo air conditioner 3 error myself?
Yes, you can try resetting the unit and checking temperature settings as a first step.
How much does it cost to fix 3 error?
$100–$400 depending on parts and labor in your region.
When should I call a technician for 3?
Call a technician if the error persists after a reset or if wiring inspection is needed.
Data last verified: 2026-04-23
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!