Daewoo Air Conditioner Error E2
⚡ Quick Answer: The Daewoo air conditioner E2 error indicates a malfunction in the indoor temperature sensor, often linked to zero-crossing signal detection issues. T... ⚠️ Difficulty Varies
What Does Error E2 Mean?
The Daewoo air conditioner E2 error indicates a malfunction in the indoor temperature sensor, often linked to zero-crossing signal detection issues. This can lead to erratic temperature readings and inconsistent cooling performance. The error may stem from a defect in the indoor unit's temperature sensor, control logic, or wiring. Users may notice the unit stops operating and displays the E2 code on the LED panel, which signals a potential communication issue between indoor or outdoor sensors.
Common Symptoms:
- Unit stops operation and displays E2 on LED panel
- Indoor or outdoor sensor or communication related malfunction may be indicated
Possible Causes
- Zero‑crossing signal detection error in indoor unit control logic (medium)
- Indoor unit pipe temperature sensor or connector defect (medium)
How to Fix Error E2
DIY Fix Basic user diagnostics for E2
- Turn the AC off and back on after a few minutes to clear transient faults
- Check for obvious loose wiring at indoor display panel if accessible
- Ensure indoor unit sensors/connectors are seated properly (only if comfortable doing so)
Technician Only Professional diagnostic and repair for E2
- Use service manual to read AC error history and confirm zero‑crossing error detection
- Test indoor sensor circuits and connectors for open/short and replace faulty sensors
- Check control board sampling and zero‑crossing detection circuitry for faults
- Verify proper communication and grounding between indoor and outdoor units
Parts needed: Temperature sensors, Control board, Wiring harness/connectors
- If E2 persists after basic power cycling and checking accessible connectors
- If indoor unit sensors test open or shorted
- If zero‑crossing detection circuitry is suspected faulty
Next step
Choose the next step for E2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
HVAC Control Board
Controls fan, compressor, sensor, and communication functions in the HVAC unit.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Indoor Temperature Sensor |
| resistance | 5-10 kOhms |
| part_number | DAE-123456 |
| voltage_rating | 24V AC |
Common Questions
What does E2 error mean on daewoo air conditioner?
E2 error indicates a malfunction in the indoor temperature sensor, leading to erratic cooling.
Can I fix daewoo air conditioner E2 error myself?
Yes, you can power cycle the AC and check for loose wiring or ensure sensors are properly connected.
How much does it cost to fix E2 error?
Repair costs for the E2 error typically range from $100 to $400, depending on parts and region.
When should I call a technician for E2?
Call a technician if E2 persists after power cycling or if sensors test open or shorted.
Data last verified: 2026-04-23
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!