Crosley Washing Machine Error E30

⚡ Quick Answer: The Crosley washing machine E30 error indicates a malfunction in the door lock mechanism, often causing the washer to refuse starting a cycle. This is... ✅ DIY Fixable

What Does Error E30 Mean?

The Crosley washing machine E30 error indicates a malfunction in the door lock mechanism, often causing the washer to refuse starting a cycle. This issue may arise from a door latch or lock failure, or a fault in the control board's lock detection system, leading to the door appearing locked or being undetectable as closed.

Common Symptoms:

  • Washer refuses to start cycle
  • Door/lid appears locked or cannot be detected as closed
  • Error displays immediately after attempting to start or after a reset

Possible Causes

  • Door lock mechanism failure or poor detection (medium)

How to Fix Error E30

DIY Fix Check and reseat door

  1. Ensure washer is powered off/unplugged
  2. Open and close the washer door firmly until it clicks
  3. Check for any visible obstructions or laundry caught in the door seal that might prevent proper closure
  4. Plug washer back in and attempt to start a cycle

Technician Only Diagnose/replace door lock assembly

  1. Disconnect power to the washer
  2. Access the door lock assembly (typically behind the front panel around the door frame)
  3. Test the door lock switch with a multimeter for continuity when actuated
  4. If the switch shows no continuity or inconsistent readings, replace the door lock assembly with the correct part for the model
  5. Reassemble and test washer function

Parts needed: Door lock assembly (latch/switch)

🛑 When to Call a Pro:
  • If the door appears to be closing properly but the error persists after user‑level checks
  • If moisture or internal damage is suspected in the lock or control electronics

Next step

Choose the next step for E30

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Door Lock Assembly

Secures the door shut during operation for safety and signals the control board to run.

Typical part-only price
$30 - $75
DIY difficulty
Easy
Estimated time
10-20 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance N/A
part_number Crosley 134363500
voltage_rating 120V AC

Common Questions

What does E30 error mean on crosley washing machine?

E30 indicates a door lock mechanism failure, causing the washer to not start.

Can I fix crosley washing machine E30 error myself?

Yes, check and reseat the door, ensuring it's closed properly and free from obstructions.

How much does it cost to fix E30 error?

$30–$120 for parts, depending on the model and required repairs.

When should I call a technician for E30?

Call if the door seems fine but the error persists or if moisture damage is suspected.

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!