Crosley Washing Machine Error SENSING

⚡ Quick Answer: The Crosley washing machine SENSING error indicates that the machine is stuck in the automatic load sensing phase, failing to progress to the wash cyc... ✅ DIY Fixable

What Does Error SENSING Mean?

The Crosley washing machine SENSING error indicates that the machine is stuck in the automatic load sensing phase, failing to progress to the wash cycle. This can happen due to a faulty lid switch or a glitch in the control board, preventing water from being added or the cycle from advancing.

Common Symptoms:

  • Washer remains at 'Sensing' indefinitely and does not add water or progress to wash cycle.
  • Cycle fails to start past sensing stage.

Possible Causes

  • Faulty lid switch or lid safety engagement (medium)
  • Control board glitch requiring reset (medium)

How to Fix Error SENSING

DIY Fix Perform basic reset and check lid engagement

  1. Unplug the washer from power for at least 5 minutes to allow the control board to reset.
  2. Ensure the lid closes firmly and engages the lid switch; listen for the click.
  3. Plug the washer back in and restart a cycle.

Technician Only Inspect/replace lid switch assembly and check control board

  1. Use a multimeter to test lid switch continuity and replace if defective.
  2. Inspect control board connections for loose harnesses or burnt components.
  3. Verify proper operation of sensors involved in the sensing process.

Parts needed: Lid switch assembly, Control board (if necessary)

🛑 When to Call a Pro:
  • If the washer still will not advance past sensing after reset and lid switch check.
  • If there are signs of control board damage (burn marks, smell), error lights beyond sensing state, or the washer behaves erratically.

Technical Specifications

wattage N/A
component Water Level Sensor
resistance 5-15 ohms
part_number Crosley 134149220
voltage_rating 120V AC

Common Questions

What does SENSING error mean on Crosley washing machine?

It means the washer is stuck in the sensing phase, unable to fill or start the wash cycle.

Can I fix Crosley washing machine SENSING error myself?

Yes, you can reset the machine and check the lid switch engagement.

How much does it cost to fix SENSING error?

Repair costs range from $50–$250 for lid switch replacement to $150–$400+ for control board replacement.

When should I call a technician for SENSING?

Call if the issue persists after resetting or if there are signs of control board damage or erratic behavior.

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!