Crosley Washing Machine: excessive vibration during spin cycle

Professional Repair Guide

What is this symptom?

Experiencing excessive vibration during the spin cycle of your Crosley washing machine? This issue can cause the washer to shake strongly or even walk on the floor. It's often due to unbalanced loads, improper leveling, or worn shock absorbers. Addressing these problems promptly can help restore stability and efficiency to your appliance.

Urgency: Medium

Important Tips for Crosley Models

  • Crosley washers frequently experience vibration due to worn shock absorbers and suspension springs; components are specific to model series and should match exact part numbers.
  • New installations should confirm removal of any shipping bolts or braces (front-load), though more common on front-load models.

Possible Causes

Unbalanced load distribution

How to Identify: Vibration occurs primarily when load is uneven (e.g., heavy items bunched on one side; redistributing clothes reduces vibration.

Part: Laundry load balance

Improper leveling or unstable floor

How to Identify: Washer rocks when pushed gently at corners; uneven feet or surface; adjusting legs reduces motion.

Part: Leveling feet/floor surface

Worn or damaged shock absorbers/dampers

How to Identify: Persistent vibration even with balanced load and level floor; visual wear or leakage on shock absorbers.

Part: Shock absorbers / damper assembly

DIY Solutions

Balance the load

Easy 2–5 minutes
  1. Pause cycle and open washer lid/door.
  2. Redistribute clothes evenly around drum; avoid overloading with bulky items.

Level the washer

Moderate 10–20 minutes
Tools Needed: spirit level, wrench or pliers
  1. Place a spirit level on top of the washer to check alignment.
  2. Adjust the leveling feet until the washer is level front-to-back and side-to-side.
  3. Tighten lock nuts on feet if present and test with a spin cycle.

Inspect & replace shock absorbers

Advanced 30–60 minutes
Tools Needed: screwdrivers, socket set
  1. Unplug washer and remove access panels.
  2. Locate and inspect shock absorbers for leaks or damage.
  3. Remove worn absorbers and install replacements.
  4. Reassemble and test machine.
⚠️ Safety First: Disconnect power before internal inspection.

Inspect suspension springs

Advanced 30–60 minutes
Tools Needed: screwdrivers, pliers
  1. Unplug washer and remove panels.
  2. Check suspension springs for breakage or stretching.
  3. Replace all broken or worn springs.
  4. Reassemble and test for vibration reduction.
⚠️ Safety First: Ensure washer is stable when panels removed.

Clear debris from drain pump

Moderate 15–30 minutes
Tools Needed: screwdriver, bucket
  1. Unplug washer.
  2. Remove pump access panel.
  3. Check for debris and clear it from drain pump.
  4. Reassemble and test.
⚠️ Safety First: Water may spill; have towel/bucket ready.

Next step

Choose the next step for excessive vibration during spin cycle

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Washer Shock Absorber

Dampens tub movement and vibration during high-speed spin cycles.

Typical part-only price
$25 - $100
DIY difficulty
Medium
Estimated time
45-90 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Washing Machine parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Washing Machine Cleaner Tablets

Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.

View maintenance supply
Maintenance supply

Braided Washer Inlet Hoses

A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.

View maintenance supply
Maintenance supply

Washer Drain Hose Holder

Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Professional Repairs

Replace drum bearings

Estimated Cost: $150–$300

Transmission or internal drive component repair

Estimated Cost: $200–$400+

When to Call a Professional

Drum makes grinding noises during spin
Shock absorbers or suspension springs are broken but user lacks tools
Drain pump issues beyond simple debris removal

Preventive Maintenance

  • Check and level machine: Future vibration due to settling or floor movement
    Frequency: monthly
  • Inspect shock absorbers/springs: Wear-related vibration issues
    Frequency: annually

Frequently Asked Questions

Why is my Crosley Washing Machine excessive vibration during spin cycle?
Common causes include unbalanced load distribution, improper leveling, and worn shock absorbers.
How do I fix Crosley Washing Machine excessive vibration during spin cycle myself?
You can balance the load, level the washer, or inspect shock absorbers and springs.
How much does it cost to fix excessive vibration during spin cycle?
Professional repairs like replacing drum bearings can cost between $150–$300.
When should I call a technician for excessive vibration during spin cycle?
If DIY solutions don't resolve the issue or if components like bearings or transmission are damaged.

Community Analytical Insights

Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions

Common Issues Reported by Users

  • Unbalanced load in the drum
  • Worn or damaged suspension rods
  • Improper leveling of the washing machine

User Suggested Solutions

  1. Redistribute the load evenly in the drum. If the load is unbalanced, stop the machine, open the lid, and rearrange the clothes to balance the weight.

  2. Inspect and replace worn or damaged suspension rods. To do this, unplug the machine, remove the top panel, and check the suspension rods for wear. Replace them if necessary.

  3. Level the washing machine. Use a level tool to check if the machine is level. Adjust the feet of the washing machine as needed to ensure it is stable.

Limited-source guidance; percentages and success-rate claims are not shown
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. Clothes washing machine - replaced suspension rods yet probl...

Community Discussions

sounding like a train during spin cycle, drum bouncing

Consider moving the springs up the rod or using dampening grease instead of replacing suspension rods.

DIY View on Reddit →

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!

Call Local Repair Provider +1 (888) 217-6318