Crosley Washing Machine Error E10
⚡ Quick Answer: The Crosley washing machine E10 error indicates a water fill issue, typically caused by a malfunctioning water inlet valve or inadequate water supply.... ✅ DIY Fixable
What Does Error E10 Mean?
The Crosley washing machine E10 error indicates a water fill issue, typically caused by a malfunctioning water inlet valve or inadequate water supply. Symptoms include the machine failing to fill with water, stopping early in the cycle, or showing the error during the fill stage. Common causes involve inadequate water supply, valve blockages, or sensor malfunctions. Addressing these issues promptly is crucial for restoring normal operation.
Common Symptoms:
- Machine does not fill with water
- Washer stops early in the cycle due to lack of water
- Error appears during fill stage
Possible Causes
- Inadequate or no water supply (medium)
- Water inlet valve malfunction or blockage (medium)
- Pressure/level switch or related sensor malfunction (low)
How to Fix Error E10
DIY Fix Check water supply and basic setup
- Ensure both hot and cold water supply valves are fully open.
- Verify water pressure at the supply hoses is adequate by running water into a bucket.
- Inspect inlet hoses for kinks, twists, or visible blockages.
- Disconnect and rinse the hose screens at the washer connection to clear debris.
Technician Only Inspect and repair water fill components
- Test water inlet valve for proper operation and replace if defective.
- Check pressure switch, water level sensor, and associated hoses for continuity and correct signaling.
- If inlet valve is receiving power but not opening properly, inspect control board output and replace components as needed.
Parts needed: Water inlet valve, Pressure/level switch, Control board (if needed)
- Error persists after basic water supply checks and simple fixes
- Signs of electrical or internal component failure
Next step
Choose the next step for E10
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 20W |
|---|---|
| component | Water Inlet Valve |
| resistance | 3-5 ohms |
| part_number | Crosley 134500900 |
| voltage_rating | 120V AC |
Common Questions
What does E10 error mean on crosley washing machine?
The E10 error indicates a water fill problem, often due to a faulty water inlet valve or inadequate water supply.
Can I fix crosley washing machine E10 error myself?
Yes, check water supply valves, inspect hoses for blockages, and ensure adequate water pressure.
How much does it cost to fix E10 error?
Repair costs range from $50 to $250+, depending on parts and labor.
When should I call a technician for E10?
Call a technician if the error persists after basic checks or if you notice signs of internal component failure.
Sources & References
Data last verified: 2026-04-23
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!