Candy Washer Dryer Error E4

⚡ Quick Answer: The Candy Washer Dryer E4 error signifies a drainage issue, typically indicating an overfill condition or a fault with the water-level sensor. When th... ✅ DIY Fixable

What Does Error E4 Mean?

The Candy Washer Dryer E4 error signifies a drainage issue, typically indicating an overfill condition or a fault with the water-level sensor. When this error occurs, the machine may stop shortly after starting, display 'E4', and exhibit unusual sounds of water sloshing. Common causes include a faulty water inlet valve that allows continuous water entry, a clogged pressure switch or hose, or problems with the drainage system. Prompt attention to this error is necessary to avoid further complications.

Common Symptoms:

  • Machine stops shortly after start
  • Error code E4/E04 shown on display or by four flashes
  • Excess water detected in drum or base tray
  • May attempt to drain immediately

Possible Causes

  • Water overfill or level sensor triggered (pressure switch/overflow) (medium)
  • Faulty or stuck water inlet valve permitting continuous water entry (medium)
  • Clogged or faulty pressure switch/pressure hose (medium)

How to Fix Error E4

DIY Fix Basic checks for E4 (waterlevel/overflow)

  1. Turn off the washer dryer and unplug it.
  2. Check if there is visible excess water in the drum.
  3. Ensure the drain hose is correctly positioned and not blocked/kinked.
  4. Run a drain/spin cycle to remove trapped water.
  5. Restart the appliance to see if the code clears.

Technician Only Inspect water inlet and level sensing components

  1. Disconnect power and water supply.
  2. Inspect/clean pressure switch hose and pressure chamber.
  3. Test pressure switch continuity and replace if faulty.
  4. Check inlet valve operation for sticking open and replace if needed.
  5. Verify correct drain and anti‑flood sensor operation in base tray.

Parts needed: Pressure switch, Pressure hose, Water inlet valve, Drain components

🛑 When to Call a Pro:
  • If E4 persists after basic user checks
  • If there are signs of water leaking under the appliance
  • If pressure switch or inlet valve tests fail

Technical Specifications

wattage 50W
component Drain Pump
resistance 30-50 ohms
part_number CANDY 41013320
voltage_rating 230V AC

Common Questions

What does E4 error mean on Candy Washer Dryer?

E4 indicates a drainage issue, often due to water overfill or a faulty water-level sensor.

Can I fix Candy Washer Dryer E4 error myself?

Yes, you can check for excess water, inspect the drain hose, and ensure it's not blocked.

How much does it cost to fix E4 error?

Estimated repair costs range from $50 to $200+, depending on the necessary parts.

When should I call a technician for E4?

Call a technician if E4 persists after user checks or if there are leaks under the appliance.

Data last verified: 2026-04-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!