Candy Washer Dryer Error E3
⚡ Quick Answer: The E3 error code on your Candy Washer Dryer indicates a drainage issue, typically caused by a blocked drain system or a faulty drain pump. You may no... ✅ DIY Fixable
What Does Error E3 Mean?
The E3 error code on your Candy Washer Dryer indicates a drainage issue, typically caused by a blocked drain system or a faulty drain pump. You may notice water remaining in the drum, and the machine may stop mid-cycle. The error often presents with a loud gurgling sound and a flashing display, signaling that the washer dryer is unable to empty water as expected.
Common Symptoms:
- Machine stops mid‑cycle with water remaining in drum
- Error appears when attempting to drain
- Possible humming from pump without actual drainage
Possible Causes
- Blocked or clogged drain system (filter/hose) (medium)
- Faulty or obstructed drain pump (medium)
How to Fix Error E3
DIY Fix Check and clear the drain filter
- Turn off and unplug the washer dryer
- Locate the drain filter access panel (usually lower front)
- Place a shallow tray/towels to catch water
- Unscrew and remove the filter and clear debris
- Rinse the filter and reinsert securely
DIY Fix Inspect drain hose and routing
- Turn off and unplug the appliance
- Check the drain hose for kinks, bends, or visible blockages
- Straighten any kinks and flush hose with water if possible
- Ensure correct installation and connection to household drain
Technician Only Test or replace the drain pump
- Disconnect appliance from power
- Remove lower access panel to reach drain pump
- Test pump electrical resistance with a multimeter (as per service manual)
- Replace pump if it shows open/short circuit or fails to operate
Parts needed: Drain pump assembly
- If water remains in drum after clearing filter and hose
- If drain pump shows electrical failure or unusual noises
- If error persists despite user‑level troubleshooting
Next step
Choose the next step for E3
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washer Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 80W |
|---|---|
| component | Drain Pump |
| resistance | 30-50 ohms |
| part_number | C00195244 |
| voltage_rating | 230V AC |
Common Questions
What does E3 error mean on Candy Washer Dryer?
E3 error indicates a drainage issue, with water remaining in the drum and the machine stopping mid-cycle.
Can I fix Candy Washer Dryer E3 error myself?
Yes, you can check and clear the drain filter and inspect the drain hose for blockages.
How much does it cost to fix E3 error?
Repairing the E3 error typically costs between $80 and $200 for parts and labor.
When should I call a technician for E3?
Call a technician if water remains after troubleshooting or if the pump shows unusual noises or electrical failure.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!