Candy Washer Dryer Error E2
⚡ Quick Answer: The Candy Washer Dryer E2 error indicates a water inlet problem, where the machine fails to fill with sufficient water within the expected time. This ... ✅ DIY Fixable
What Does Error E2 Mean?
The Candy Washer Dryer E2 error indicates a water inlet problem, where the machine fails to fill with sufficient water within the expected time. This may be due to issues such as a closed water supply tap, low water pressure, kinked hoses, a clogged inlet filter, or a faulty water inlet valve. As a result, the washing cycle stops shortly after starting, typically around 3-4 minutes, without filling the drum adequately.
Common Symptoms:
- Machine displays E2/E02 shortly after cycle start.
- Drum does not fill with water or fills very slowly.
- Cycle stops early with the error displayed.
Possible Causes
- Insufficient or no water supply (tap closed, low pressure, kinked hose) (medium)
- Clogged or dirty water inlet filter (medium)
- Faulty water inlet valve (solenoid valve) (medium)
- Pressure switch or inlet sensor issue (medium)
How to Fix Error E2
DIY Fix Basic water supply and filter checks
- Ensure the water supply tap connected to the machine is fully open.
- Inspect the inlet hoses for kinks, twists, or damage.
- Turn off power and water, then clean the water inlet filter screens at the hose connection to remove debris.
- Restart the machine and check if the error persists.
Technician Only Inspect and replace inlet valve or pressure components
- Verify correct water pressure and flow rate at the machine’s inlet.
- Test the water inlet valve (solenoid) for proper electrical operation and replace if malfunctioning.
- Inspect the pressure switch and its hose for blockages or faults; replace if necessary.
- Check wiring connections to inlet valve and pressure sensors for damage.
Parts needed: Water inlet valve (solenoid), Inlet hose filters/screens, Pressure switch or sensor
- If basic water supply checks do not clear the error.
- If inspection reveals internal components fault (inlet valve, pressure switch) you cannot safely diagnose or replace.
- If there are signs of water leakage or electrical issues.
Next step
Choose the next step for E2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Model-compatible Washer Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Door Lock Assembly |
| resistance | 1-5 ohms |
| part_number | CANDY 41021020 |
| voltage_rating | 230V AC |
Common Questions
What does E2 error mean on Candy Washer Dryer?
E2 error indicates a water inlet issue preventing the machine from filling with water.
Can I fix Candy Washer Dryer E2 error myself?
Yes, check the water supply, inspect hoses for kinks, and clean the inlet filter.
How much does it cost to fix E2 error?
Repair costs are moderate, depending on parts and labor in your region.
When should I call a technician for E2?
Call a technician if basic checks don't resolve the error or if internal parts need replacement.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!