Bosch Washing Machine Error E67
⚡ Quick Answer: The Bosch washing machine error E67 indicates a malfunction in the control module, often linked to the PU and OU boards. This error typically prevents... ✅ DIY Fixable
What Does Error E67 Mean?
The Bosch washing machine error E67 indicates a malfunction in the control module, often linked to the PU and OU boards. This error typically prevents the machine from starting a cycle, displays erratic indicator lights, and may cause the drum to remain stationary despite the motor humming. If not addressed, the washing machine may drain immediately after filling or demonstrate inconsistent motor speeds.
Common Symptoms:
- Shows E67 on display and will not start a cycle
- Random blinking or illogical indicator behaviour
- Programs do not begin or abort mid‑cycle
- Drum does not turn even if the motor hums
- Immediate drain after fill or inconsistent motor speed
Possible Causes
- Control module (PU PCB or OU PCB) defect or failure (medium)
- Wiring or connector issues affecting control board communication (medium)
- Voltage surges or environmental factors leading to board faults (low)
- Motor or drum related fault as reported by user forum (low)
How to Fix Error E67
DIY Fix Power cycle to reset potential transient fault
- Turn off the washing machine at the mains.
- Unplug it and wait at least 10–20 minutes.
- Plug it back in and power on to see if the error clears.
Technician Only Inspect and repair/replace control boards and wiring
- Disconnect mains power and open the service access.
- Visually inspect wiring harnesses and connectors for signs of damage.
- Test PU and OU PCBs for faults using service diagnostics.
- Replace defective control board(s) or repair wiring as needed.
Parts needed: PU PCB (Power Unit), OU PCB (Output/Communication Board), Wiring harness/connectors
- If the error persists after a proper power reset
- If there are signs of electrical damage, burnt smells, or smoke
- If you are not trained to safely work inside appliance electrical systems
Next step
Choose the next step for E67
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-30 ohms |
| part_number | Bosch 00167643 |
| voltage_rating | 120V AC |
Common Questions
What does E67 error mean on bosch washing machine?
E67 indicates a control module malfunction, preventing the washing machine from starting or completing cycles.
Can I fix bosch washing machine E67 error myself?
Yes, you can try power cycling the machine by unplugging it for 10-20 minutes to reset potential transient faults.
How much does it cost to fix E67 error?
Repair costs are moderate to high, especially if control board replacement is needed, which can be expensive.
When should I call a technician for E67?
Call a technician if the error persists after a reset, if there are signs of electrical damage, or if you are unsure about handling electrical systems.
Sources & References
- Bosch PU Error Info Document (official)
- Error E67 in the Bosch washing machine - Hundred worries (community)
- E67 Error in a Bosch washing machine (repair site) (community)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!