Bosch Washing Machine Error E37
⚡ Quick Answer: The Bosch washing machine error E37 indicates a malfunction related to the NTC temperature sensor or its circuitry, often resulting in the machine sto... ✅ DIY Fixable
What Does Error E37 Mean?
The Bosch washing machine error E37 indicates a malfunction related to the NTC temperature sensor or its circuitry, often resulting in the machine stopping mid-cycle. Users may also notice unusual noises during operation, particularly when draining. Addressing this issue typically involves checking or replacing the temperature sensor and ensuring the internal wiring is intact.
Common Symptoms:
- Error E37 displayed on control panel
- Machine may stop mid‑cycle
Possible Causes
- Faulty or mis‑reading NTC temperature sensor or its circuit (medium)
How to Fix Error E37
DIY Fix Basic inspection and reset
- Turn the washer off and unplug it from the power outlet.
- Wait a few minutes and plug it back in to see if the error clears.
- Ensure the washer door is firmly closed and the load is balanced.
Technician Only Check and replace temperature sensor or related wiring
- Access the internal control area of the washer following manufacturer safety procedures.
- Inspect the NTC temperature sensor and its wiring harness for damage, corrosion, or loose connections.
- Test the sensor with a multimeter for proper resistance values per Bosch specifications and replace if defective.
- Verify control board communication to the sensor circuit.
Parts needed: NTC temperature sensor, Wiring harness/connectors
- If the error persists after basic reset and inspection
- If internal wiring or sensor tests are outside safe handling ability
Next step
Choose the next step for E37
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-30 ohms |
| part_number | Bosch 00619833 |
| voltage_rating | 120V AC |
Common Questions
What does E37 error mean on Bosch washing machine?
E37 error indicates a malfunction in the NTC temperature sensor or its circuit, causing the machine to stop mid-cycle.
Can I fix Bosch washing machine E37 error myself?
Yes, you can perform basic inspections and resets by unplugging the machine and checking the door and load balance.
How much does it cost to fix E37 error?
Repair costs for the E37 error range from ¥8,000 to ¥30,000+, depending on parts and labor.
When should I call a technician for E37?
Call a technician if the error persists after a reset or if you are unable to safely check the internal wiring or sensor.
Sources & References
- Bosch Washer Error Codes (no E37 listed) (official)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!