Bosch Washing Machine Error E35
⚡ Quick Answer: The Bosch washing machine error E35 indicates a leak detection at the base of the machine, triggering a protective shutdown. This typically occurs whe... ✅ DIY Fixable
What Does Error E35 Mean?
The Bosch washing machine error E35 indicates a leak detection at the base of the machine, triggering a protective shutdown. This typically occurs when water is detected in the base pan, preventing the washer from filling or draining properly. Symptoms may include the machine stopping mid-cycle, a locked door, and potential water accumulation underneath the washer. Addressing drainage issues or a faulty door lock mechanism may also be necessary.
Common Symptoms:
- Washing machine stops mid‑cycle
- Door remains locked and won’t open
- Error displayed before or during drain/spin
- Possible water accumulation under the washer
Possible Causes
- Water detected in base pan (leak/flood sensor triggered) (medium)
- Drainage blockage leading to water residence and leak trigger (medium)
- Faulty door lock mechanism (secondary pattern from community) (low)
How to Fix Error E35
DIY Fix Check for water in base and basic drainage
- Unplug the washing machine and turn off the water supply.
- Open the lower service flap and carefully check for water in the base pan; soak up any water with towels.
- Access and clean the pump filter; remove debris and ensure the drain hose isn’t kinked or blocked.
- Try running a short Drain/Spin cycle after cleaning.
Technician Only Professional leak and component diagnostics
- Inspect and diagnose the base leak detection sensor and tray for faults.
- Check and test drain pump, hoses, and pressure sensors for proper operation.
- Inspect door lock mechanism and drain system components if required.
- Replace defective parts as identified by testing.
Parts needed: Leak/flood detection sensor, Drain pump assembly, Door lock assembly (if related), Pressure/water level sensor
- If water is found in the base pan and persists after cleaning the drain system
- If the error persists after basic user‑level steps
- If there is a confirmed door lock or sensor hardware malfunction
Next step
Choose the next step for E35
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Door Lock Assembly
Secures the door shut during operation for safety and signals the control board to run.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Water Level Sensor |
| resistance | 1-5 ohms |
| part_number | Bosch 00167782 |
| voltage_rating | 120V AC |
Common Questions
What does E35 error mean on Bosch washing machine?
E35 indicates leak detection at the base, causing a protective shutdown and preventing proper filling or draining.
Can I fix Bosch washing machine E35 error myself?
Yes, you can check for water in the base and clean the drain system by following basic DIY steps.
How much does it cost to fix E35 error?
Repair costs range from $100 to $300+, depending on parts and region.
When should I call a technician for E35?
Call a technician if water remains in the base after cleaning, or if the error persists despite DIY efforts.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!