Bosch Washing Machine Error E25
⚡ Quick Answer: The Bosch washing machine error E25 indicates a fault with the turbidity sensor, which measures water cloudiness. This error often leads to unusual so... ✅ DIY Fixable
What Does Error E25 Mean?
The Bosch washing machine error E25 indicates a fault with the turbidity sensor, which measures water cloudiness. This error often leads to unusual sounds during operation and may cause the wash cycle to stop prematurely. Additionally, the machine may struggle to accurately assess water cleanliness, resulting in incomplete cycles and potential drainage issues. Addressing this error typically involves checking the turbidity sensor, drain pump, and associated components for blockages or faults.
Common Symptoms:
- Error E25/F25 displayed on the washer panel
- Wash cycle may stop early
- Possible inability to correctly assess water cleanliness
Possible Causes
- Turbidity sensor fault (high)
How to Fix Error E25
DIY Fix Basic visual checks and documentation
- Turn off and unplug the washing machine.
- Note the full model number and error code details for reference.
- Check the user manual for any model‑specific notes on E25.
Technician Only Professional diagnostics and repair
- Inspect and test the turbidity sensor for proper function.
- Check the drain pump, filter, and hoses for blockages or mechanical failure.
- Verify wiring and control board signals associated with the sensor and pump.
- Replace faulty components as identified (e.g., turbidity sensor, drain pump).
Parts needed: Turbidity sensor, Drain pump and impeller, Pump filter and hoses, Wiring/connectors
- If the error persists after any safe basic checks.
- If water remains in the drum and drainage components appear blocked or malfunctioning.
- If you are unsure how to safely inspect internal components.
Next step
Choose the next step for E25
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-30 ohms |
| part_number | Bosch 00619824 |
| voltage_rating | 240V AC |
Common Questions
What does E25 error mean on bosch washing machine?
E25 indicates a turbidity sensor fault, affecting water cleanliness assessment and possibly causing the cycle to stop early.
Can I fix bosch washing machine E25 error myself?
Yes, you can perform basic checks by turning off the machine, unplugging it, and referring to the user manual for specific notes.
How much does it cost to fix E25 error?
Repair costs vary by region but are typically moderate for replacing the turbidity sensor or drain pump.
When should I call a technician for E25?
Call a technician if the error persists after basic checks, if water remains in the drum, or if you're unsure about inspecting internal components.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!