Bosch Washing Machine Error E19
⚡ Quick Answer: The Bosch Washing Machine E19 error indicates a heating time exceeded issue, meaning the washer cannot heat water to the required temperature in the d... ✅ DIY Fixable
What Does Error E19 Mean?
The Bosch Washing Machine E19 error indicates a heating time exceeded issue, meaning the washer cannot heat water to the required temperature in the designated time. This often results in cold or lukewarm washes and may be caused by a faulty heating element, a malfunctioning temperature sensor, or limescale buildup affecting the heating circuit.
Common Symptoms:
- Wash cycle stops prematurely with E19 displayed
- Water not reaching set temperature
- Cold or lukewarm wash even on hot cycles
- Extended heating time followed by error
Possible Causes
- Heating element failure or inefficiency (medium)
- Temperature sensor (thermistor) malfunction (medium)
- Limescale or water flow restriction around heating circuit (medium)
How to Fix Error E19
DIY Fix Restart and check simple conditions
- Turn off and unplug the washing machine.
- Wait 5–10 minutes and reconnect power to reset control electronics.
- Run a wash cycle without selecting a hot program to see if the code recurs.
Technician Only Inspect and service heating circuit components
- Test the heating element for continuity and resistance; replace if out of spec.
- Check the temperature sensor/thermistor for correct readings; replace if flawed.
- Inspect for limescale buildup or water flow issues around the heater.
- Verify wiring connections to heating components are secure.
Parts needed: Heating element assembly, Temperature sensor/thermistor, Wiring harness/connectors
- If the error persists after basic reset attempts.
- If you notice burning smells, tripped breakers, or water leaks.
- If you are not confident in performing multi-component diagnostics.
Next step
Choose the next step for E19
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Thermistor
Measures precise temperature changes and sends resistance feedback to the control board.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 30W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | Bosch 00619816 |
| voltage_rating | 120V AC |
Common Questions
What does E19 error mean on Bosch Washing Machine?
E19 indicates a heating time exceeded issue, causing the washer to struggle to heat water to the set temperature.
Can I fix Bosch Washing Machine E19 error myself?
Yes, try restarting the machine or running a cycle without a hot program to see if the error recurs.
How much does it cost to fix E19 error?
Repair costs typically range from $100 to $300+, depending on parts and labor.
When should I call a technician for E19?
Call a technician if the error persists after troubleshooting or if you notice burning smells or leaks.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!