Bosch Washing Machine Error E16
⚡ Quick Answer: The Bosch Washing Machine E16 error indicates a water inlet issue caused by the door not being securely closed or latched. This issue prevents the mac... ✅ DIY Fixable
What Does Error E16 Mean?
The Bosch Washing Machine E16 error indicates a water inlet issue caused by the door not being securely closed or latched. This issue prevents the machine from starting the wash cycle or filling with water, often showing a flashing display until the door problem is resolved.
Common Symptoms:
- Error code displayed when starting or during a wash cycle
- Machine does not start washing or fill with water until door issue is resolved
- Cycle may halt immediately with the error
Possible Causes
- Door not fully closed/latched (high)
- Obstruction preventing door closure (medium)
- Faulty door latch/lock sensor (medium)
How to Fix Error E16
DIY Fix Ensure door is fully closed and unobstructed
- Open the washing machine door.
- Check that no clothing or objects are caught in the door seal or latch area.
- Firmly push the door until you hear a clear click indicating it is fully latched.
- Restart the cycle.
DIY Fix Clean the door seal and latch area
- Remove any lint, debris, or detergent buildup around the door gasket and latch area using a soft cloth.
- Ensure the latch area can engage without obstruction.
- Try closing the door again and running the machine.
Technician Only Inspect and possibly replace door latch/lock assembly
- Disconnect power to the machine.
- Remove the washing machine’s front panel or door assembly as required.
- Inspect the door latch mechanism and lock sensor for wear or damage.
- Test continuity of the latch sensor circuit.
- Replace defective latch or lock components with manufacturer‑approved parts.
Parts needed: Door latch assembly, Door lock sensor
- If the door appears broken, misaligned, or does not latch properly after cleaning and checking.
- If error persists after eliminating obstructions and confirming closure.
- If electrical issues such as intermittent sensor triggering are suspected.
Next step
Choose the next step for E16
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door Latch Assembly
Mechanically secures the appliance door and may operate a door-closed safety switch.
- Typical part-only price
- $15 - $80
- DIY difficulty
- Medium
- Estimated time
- 20-60 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Door Lock Assembly
Secures the door shut during operation for safety and signals the control board to run.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 15W |
|---|---|
| component | Water Inlet Valve |
| resistance | 10-20 ohms |
| part_number | Bosch 00624432 |
| voltage_rating | 120V AC |
Common Questions
What does E16 error mean on Bosch Washing Machine?
E16 error means the door is not securely closed, preventing the machine from filling with water.
Can I fix Bosch Washing Machine E16 error myself?
Yes, check that the door is fully closed and clear of obstructions, then try running the machine again.
How much does it cost to fix E16 error?
Repair costs for the E16 error range from ¥8,000 to ¥25,000 depending on parts and region.
When should I call a technician for E16?
Call a technician if the door is damaged, misaligned, or if the error persists despite checking the door.
Sources & References
- Bosch Home Appliances - E16/F16 Error Code (official)
- Bosch UK Customer Service - Washing Machine E16 Error (official)
- Bosch Washer Error E16/F16 Door Not Closed Fix (community)
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!