Bosch Washing Machine Error E13
⚡ Quick Answer: The Bosch washing machine error E13 signifies a drainage issue where the washer fails to drain water within the designated time. Symptoms include wate... ✅ DIY Fixable
What Does Error E13 Mean?
The Bosch washing machine error E13 signifies a drainage issue where the washer fails to drain water within the designated time. Symptoms include water remaining in the drum after the drain cycle, a spin cycle that may not start due to residual water, and the error code displaying shortly after a draining attempt. Common causes include a blocked drain pump filter, an obstructed or kinked drain hose, or a faulty drain pump. Addressing these issues promptly can help restore your machine's function.
Common Symptoms:
- Water remains in drum after drain cycle
- Spin cycle may not start due to residual water
- Error code displayed shortly after attempted draining
Possible Causes
- Blocked or clogged drain pump filter (medium)
- Obstructed or kinked drain hose (medium)
- Faulty or failing drain pump (impeller blocked or pump defective) (medium)
- Pressure switch / water level sensor issues affecting drain control (low)
How to Fix Error E13
DIY Fix Check and clear drain pump filter
- Unplug the washing machine from the power outlet.
- Open the service hatch at the bottom front of the washer.
- Place a shallow tray or towels to catch water.
- Unscrew and remove the drain pump filter.
- Clean out lint, debris and obstructions, then replace the filter.
DIY Fix Inspect drain hose for kinks or blockages
- Turn off and unplug the washer.
- Check the drain hose at the back for bends or pinch points.
- Disconnect the hose and flush it with water to clear debris.
- Reinstall ensuring a proper, unobstructed routing.
Technician Only Test or replace drain pump
- Disconnect power and access internal components.
- Test drain pump electrical continuity and operation during drain cycle.
- Replace the pump if resistance readings or operation are outside specifications.
Parts needed: drain pump assembly
Technician Only Inspect pressure switch / water level sensor
- Disconnect power and locate pressure switch or level sensor.
- Check tubing and connections for blockages or damage.
- Test sensor function with appropriate tools and replace if faulty.
Parts needed: pressure switch / water level sensor
- If after cleaning filter and hose the error persists
- If water continues to remain and parts testing indicates pump or sensor faults
- If internal component access is required and you are not experienced
Next step
Choose the next step for E13
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-30 ohms |
| part_number | Bosch 00619829 |
| voltage_rating | 240V AC |
Common Questions
What does E13 error mean on Bosch washing machine?
E13 error indicates a drainage issue, often related to a blocked pump filter or hose.
Can I fix Bosch washing machine E13 error myself?
Yes, you can check and clear the drain pump filter and inspect the drain hose for blockages.
How much does it cost to fix E13 error?
The estimated repair cost ranges from ¥8,000 to ¥25,000, including parts and labor.
When should I call a technician for E13?
Call a technician if the error persists after cleaning, or if internal components require access.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!