Bosch Oven Error F16
⚡ Quick Answer: The Bosch oven error F16 indicates a possible malfunction in the temperature sensor or its wiring, leading to erratic temperature readings and inconsi... ✅ DIY Fixable
What Does Error F16 Mean?
The Bosch oven error F16 indicates a possible malfunction in the temperature sensor or its wiring, leading to erratic temperature readings and inconsistent cooking results. This may prevent the oven from starting or heating properly, impacting your cooking experience. Addressing this issue typically involves checking the temperature sensor and associated wiring for faults.
Common Symptoms:
- Error F16 displayed on oven control panel
- Oven may not start or may stop heating
Possible Causes
- Temperature Sensor
- Wiring Issues
- Control Board Malfunction
How to Fix Error F16
DIY Fix Power cycle the oven
- Turn off the oven at the circuit breaker or power switch.
- Wait 1–2 minutes.
- Turn the power back on and see if F16 clears.
Technician Only Inspect temperature sensor and wiring
- Disconnect oven from power supply.
- Remove access panels to reach the internal temperature sensor (thermistor).
- Visually inspect sensor and wiring for damage or loose connections.
- Test sensor resistance with a multimeter; compare to expected value per model specs.
- Replace sensor or repair wiring if fault is found.
Parts needed: Temperature sensor (thermistor), Wiring harness
- Any signs of electrical burning smell or visible damage
- Error persists after power cycling
- Uncertain diagnosis of temperature sensor or wiring
Next step
Choose the next step for F16
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 10K ohms at 25°C |
| part_number | 00490011 |
| voltage_rating | 120V AC |
Common Questions
What does F16 error mean on bosch oven?
F16 error indicates a malfunction in the temperature sensor or wiring, affecting oven operation.
Can I fix bosch oven F16 error myself?
Yes, you can try power cycling the oven to reset the error.
How much does it cost to fix F16 error?
Estimated repair costs range from $50 to $200, depending on parts and labor.
When should I call a technician for F16?
Call a technician if there's an electrical burning smell, visible damage, or if the error persists after power cycling.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!