Bosch Oven: not heating

Professional Repair Guide

What is this symptom?

Is your Bosch oven not heating? While it powers on and the display responds, the oven cavity fails to reach the set temperature. This issue can arise in both electric and gas models, often due to a faulty heating element or a weak gas igniter. Understanding the potential causes can help in troubleshooting this frustrating problem.

Urgency: Medium

Important Tips for Bosch Models

  • Bosch official support lists heating element issues and recommends qualified engineers for repair.
  • Bosch UK support specifically recommends contacting Bosch engineers rather than DIY for oven not heating.

Possible Causes

Faulty heating element (electric ovens)

How to Identify: Electric ovens: set to bake/broil and check if the visible elements glow red; no glow or dark spots indicates failure.

Part: Bake/Broil/Convection heating element

Weak or broken gas igniter (gas ovens)

How to Identify: Igniter glows but doesn’t ignite gas within normal time, or flame doesn’t appear; observed in multiple DIY guides.

Part: Oven gas igniter

Defective oven temperature sensor/thermostat

How to Identify: Oven may power on but fail to reach or maintain set temp; multimeter resistance out of expected range.

Part: Oven temperature sensor

Control board failure

How to Identify: Display glitches, error codes that don’t clear with reset, non-responsive buttons but oven powers on.

Part: Electronic control board

Door seal/closure problem

How to Identify: Heat escapes from oven during operation, oven struggles to maintain temperature.

Part: Door gasket/hinges

DIY Solutions

Inspect and Replace Heating Element (Electric)

Moderate 30-60 minutes
Tools Needed: screwdriver, multimeter
  1. Turn off power at breaker.
  2. Remove oven racks and access element mounting screws.
  3. Disconnect old element wires and remove.
  4. Install new element, reconnect wires, secure screws.
  5. Restore power and test heating.
⚠️ Safety First: Always disconnect power before internal access.

Check and Replace Oven Temperature Sensor

Moderate 30-60 minutes
Tools Needed: screwdriver, multimeter
  1. Disconnect power.
  2. Access sensor inside oven cavity (usually rear).
  3. Test resistance at room temp; replace if out of expected range.
  4. Install new sensor and reconnect, reassemble oven.
  5. Restore power and test temperature behavior.
⚠️ Safety First: Power must be off.

Professional Repairs

Replace Gas Igniter (Gas Oven)

Estimated Cost: $175 - $275

Control Board Diagnosis and Replacement

Estimated Cost: $125 - $300

When to Call a Professional

Suspected gas-related issues or igniter failure
Control board/display error codes unresolved after reset
Visible wiring damage or inability to safely access internal parts

Preventive Maintenance

  • Clean oven interior and elements regularly: buildup that can degrade element performance
    Frequency: monthly
  • Check door seals for wear: heat loss reducing cooking efficiency
    Frequency: annually

Frequently Asked Questions

Why is my Bosch Oven not heating?
Common causes include a faulty heating element for electric ovens or a weak gas igniter for gas ovens.
How do I fix Bosch Oven not heating myself?
You can inspect and replace the heating element or check the oven temperature sensor for issues.
How much does it cost to fix not heating?
Professional repairs range from $175 to $275 for a gas igniter or $125 to $300 for a control board replacement.
When should I call a technician for not heating?
If DIY solutions do not resolve the issue or if you're uncomfortable with repairs, it's time to call a professional.

References & Sources

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

70%
DIY Success Rate Difficulty: DIY

Common Issues Reported by Users

  • Igniter failure (6 mentions)
  • Temperature sensor issues (4 mentions)
  • Control board malfunction (3 mentions)

User Suggested Solutions

  1. Replace the igniter to restore gas flow.

    Success rate: 11.0%

  2. Substituting the temperature probe with a compatible one.

    Success rate: 3.0%

  3. Check the oven sensor for proper resistance.

    Success rate: 3.0%

  4. Resetting the breaker resolved the issue.

    Success rate: 3.0%

  5. Replace the display and power module.

    Success rate: 3.0%
Analysis based on 20 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. Bosch Oven Bake Function not working
  2. Bosch oven doesn't want to heat
  3. Oven cooling fan repair
  4. Bosch oven will not heat
  5. Bosch oven keeps turning program off and back on
  6. Trying to figure out a substitution for a Bosch temperature ...
  7. Bosch gas oven not working - model HGI8054UC/06
  8. Bosch HGI8054UC oven's bake igniter does not come on. Everyt...
  9. Bosch 500 Series Gas Oven Not Heating To Displayed Temperatu...
  10. Bosch Gas Oven not working
  11. Bosch Oven doesn't get warm enough: HES242U/01
  12. Bosch oven HGS25 won’t heat despite replaced igniter
  13. Bosch Oven - Bottom oven not heating, no fan
  14. Bosch oven preheats then stops heating
  15. Bosch oven not heating after repair
  16. Bosch HBS534BB0B not heating to set temp
  17. Bosch 800 Series Model (Gas) HGI8054UC/02 Continual Oven pro...
  18. HGS8655UC BOSCH OVEN
  19. Bosch HGI8054UC Oven Won't Bake
  20. Bosch Hgi8054uc oven won’t heat on bake.

Community Discussions

will not heat - no error codes

The thermal cutoff switch was the issue and was located behind the front small grill below the control panel.

DIY View on Reddit →

oven keeps turning program off and back on

Changed the display and power module of the oven.

Pro needed View on Reddit →

oven wont heat up

Resetting the breaker resolved the issue.

DIY View on Reddit →

bottom oven not heating, no fan

The issue was with the mechanism/switch behind the knob that turns the oven on and sets the temperature, which was replaced.

DIY View on Reddit →

oven refuses to heat up

Replace the igniter if it is not drawing the correct current.

DIY View on Reddit →

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!