Bosch Oven Error F13
⚡ Quick Answer: The Bosch oven error F13 indicates a malfunction related to the temperature sensor or control board. This error may lead to erratic temperature readin... ✅ DIY Fixable
What Does Error F13 Mean?
The Bosch oven error F13 indicates a malfunction related to the temperature sensor or control board. This error may lead to erratic temperature readings, failure to heat, or unresponsiveness to user inputs. If the F13 code appears, it suggests potential issues with the oven's internal control module or power board, which may require calibration or replacement to restore proper functionality.
Common Symptoms:
- Error F13 displayed on oven control panel
- Oven may not start heating or respond to inputs
Possible Causes
- Internal oven control module / power board calibration or defect (medium)
How to Fix Error F13
DIY Fix Power reset the oven
- Turn off the oven at the circuit breaker or unplug it.
- Wait at least 60 seconds.
- Restore power and check if the error clears.
Technician Only Inspect and replace control board
- Disconnect power to the oven.
- Access the oven’s control panel per model service instructions.
- Test and calibrate the control/power board or replace it if defective.
- Verify wiring harnesses and connectors to the control board are intact.
Parts needed: oven control board / power board, associated wiring harnesses
- If the error persists after power reset
- If control board diagnostics or replacement is required
- If there are signs of electrical damage (burnt connectors, smoke smell)
Next step
Choose the next step for F13
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Power Control Board
Distributes and switches electrical power for the appliance's major loads.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 1000-1100 ohms |
| part_number | 00420180 |
| voltage_rating | 120V AC |
Common Questions
What does F13 error mean on bosch oven?
F13 indicates a malfunction in the temperature sensor or control board, causing erratic temperature readings.
Can I fix bosch oven F13 error myself?
Yes, you can attempt a power reset by turning off the oven at the circuit breaker, waiting 60 seconds, and restoring power.
How much does it cost to fix F13 error?
Repair costs for the F13 error typically range from $200 to $600+, including parts and labor.
When should I call a technician for F13?
Call a technician if the error persists after a power reset, or if you notice signs of electrical damage.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!