Bosch Oven Error F10
⚡ Quick Answer: The Bosch oven error F10 indicates a malfunction in the temperature sensor or control system, leading to erratic temperature readings and inconsistent... ✅ DIY Fixable
What Does Error F10 Mean?
The Bosch oven error F10 indicates a malfunction in the temperature sensor or control system, leading to erratic temperature readings and inconsistent cooking performance. This error often appears when the oven fails to heat normally, either during the heat-up phase or shortly after reaching the desired temperature. The oven may shut down immediately after displaying this error code, signaling potential issues with the temperature sensor, wiring, or touchpad.
Common Symptoms:
- Error appears on display and oven will not heat normally
- Occurs during heat up or shortly after temperature is reached
- Oven may shut down immediately upon showing code
Possible Causes
- Faulty oven temperature sensor (RTD probe) (medium)
- Loose or damaged wiring between sensor and control board (medium)
- Stuck or faulty touchpad/button on some models (low)
How to Fix Error F10
DIY Fix Basic reset and check
- Turn off and disconnect oven from power (unplug or breaker off)
- Wait 1–2 minutes and restore power to see if error clears
DIY Fix Visual inspection of sensor and wiring
- Locate oven temperature sensor inside cavity (back wall)
- Visually inspect sensor and wiring for loose connectors, damage or corrosion
Technician Only Test and replace oven temperature sensor
- Disconnect power and access the oven temperature sensor
- Use multimeter to check resistance against expected values
- Replace sensor if resistance is out of specification
Parts needed: oven temperature sensor
Technician Only Inspect and service control board or touchpad
- Access control board and check for signs of damage or overheating
- Test board communication with sensor circuit
- Replace control board or touchpad assembly if faulty
Parts needed: control board, touchpad/clock assembly (specific models)
- After basic checks if F10 persists
- If you’re not comfortable testing parts or accessing internal components
- If error returns immediately after reset
Next step
Choose the next step for F10
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 1000-2000 ohms |
| part_number | 00430043 |
| voltage_rating | 120V AC |
Common Questions
What does F10 error mean on Bosch oven?
F10 indicates a malfunction in the temperature sensor or control system, causing heating issues.
Can I fix Bosch oven F10 error myself?
Yes, you can perform a basic reset and visually inspect the sensor and wiring.
How much does it cost to fix F10 error?
Repair costs range from $20–$60 for parts, plus labor if a technician is needed.
When should I call a technician for F10?
Call a technician if the error persists after basic checks or if you're uncomfortable with repairs.
Sources & References
- How To Fix F10 Error On Oven: Troubleshoot & Repair Guide (community)
- How to Fix F10 Error on Oven - ShiftyChevre (community)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!